Regal Rexnord
Browning #60-1 ROLLER CHAIN CONNECTING LINK BRW 60-S/C-C/L
Browning® 1297605 Spring Clip Connecting Link, 60 Chain, 3/4 in Pitch, 1.081 in OAW, 0.234 in Dia Pin, Steel
Browning #60-1 ROLLER CHAIN CONNECTING LINK BRW J-60-S/C-C/L
Browning® 1297605 Spring Clip Connecting Link, 60 Chain, 3/4 in Pitch, 1.081 in OAW, 0.234 in Dia Pin, Steel
Browning #60-1 ROLLER CHAIN OFFSET LINKS BRW J-60-O/S-C/L
Browning® 1298009 Offset Link, 60 Chain, 3/4 in Pitch, 0.99 in OAW, 0.234 in Dia Pin
Browning #60-CHAIN TORQUE LIMITER SPROCKETS BRW 60-T-45-L-40
Browning® 1111947 A Plate Sprocket, 60 Chain, 40 Teeth, For Use With T45L Torque Limiters, 9.98 in OD
Browning #80 ROLLER CHAIN CONNECTING LINKS BRW 80-C/P-C/L
Browning® 1297621 Cotter Pin Connecting Link, 80 Chain, 1 in Pitch, 1.274 in OAW, 0.312 in Dia Pin, Steel
Browning #80-1 RIVETED ROLLER CHAIN BRW J-80-RIV-10-FTCH
Browning® 1293570 Standard Riveted Roller Chain, 1 in Pitch, 5/8 in Dia x 5/8 in W Roller, Steel
Browning #80-1 ROLLER CHAIN OFFSET LINKS BRW 80-O/S-C/L
Browning® 1298017 Offset Link, 80 Chain, 1 in Pitch, 1.274 in OAW, 0.312 in Dia Pin
Browning #80-1 ROLLER CHAIN OFFSET LINKS BRW J-80-O/S-C/L
Browning® 1298017 Offset Link, 80 Chain, 1 in Pitch, 1.274 in OAW, 0.312 in Dia Pin
Browning #80-2 COTTER PIN CONNECTING LINKS BRW J-80-2-C/P-C/L
Browning® 1297738 Cotter Pin Connecting Link, 80-2 Chain, 1 in Pitch, 1.274 in OAW, 0.312 in Dia Pin, Steel
Browning #80-2 RIVETED ROLLER CHAIN BRW J-80-2-RIV-10-FTCH
Browning® 1293570 Standard Riveted Roller Chain, 1 in Pitch, 5/8 in Dia x 5/8 in W Roller, Steel
Browning #C-2062-H ROLLER CHAIN OFFSET LINK BRW C-2062-H-O/L
Morse® 089153 Large Offset Link, C-2060H Chain, 1-1/2 in Pitch, 1.207 in OAW, 0.234 in Dia Pin, Steel
Browning 0-TOOTH #50-1 CHAIN SPROCKETS BRW H-5010 X 7/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Browning 1-1/16"-ID QD JA-STYLE BUSHINGS BRW JA-1.1/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning 1-1/16"-ID QD SD-STYLE BUSHINGS BRW SD-1.1/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning 1-1/16"-ID QD SDS-STYLE BUSHINGS BRW SDS-1.1/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning 1-1/16"-ID QD SK-STYLE BUSHINGS BRW SK-1.1/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning 1-1/2"-ID 2-BOLT TRB PILLOW BLOCKS BRW PBE-920 X 1-1/2
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Browning 1-1/2"-ID 4-BOLT TRB FLANGE UNITS BRW FBE-920 X 1-1/2
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Browning 1-1/2"-ID BB TAKE-UP BEARING UNITS BRW VTWE-224
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning 1-1/2"-ID QD SD-STYLE BUSHINGS BRW SD-1-1/2
Century® SD112 4-Pole Continuous Duty Motor, Totally Enclosed Fan Cooled Enclosure, 5 hp, 208 to 230/460 V, 60 Hz, 3 Phase, 184T Frame, 1758 rpm Speed, Rigid Base Mount
Browning 1-1/2"-ID TORQTAPER BUSHINGS BRW 203-TB-P-108
Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.
Browning 1-1/4"-ID 2-BOLT BB FLANGE UNITS BRW VF-2-E-220-S
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning 1-1/4"-ID 2-BOLT TRB PILLOW BLOCKS BRW PBE-920 X 1-1/4
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Browning 1-1/4"-ID 4-BOLT TRB FLANGE UNITS BRW FBE-920 X 1-1/4
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Recently Viewed
Campbell® T7600531-02 Snap, 90 lb Load, 7/16 in Snap, 3-1/4 in OAL, Malleable Iron
The Medalist 350 Utility Kit is a heavy duty Cutting and Welding outfit that can cut up to 152 mm (6 in.) with optional tips and weld up to 76 mm (3 in.) with optional nozzles. Conveniently packaged in a durable utility bag. Select kits available with 6.4 mm x 6 m (1/4 in. x 20 ft) Grade "T" hoses.
20" X 10' .0078 ALUMINUM FLASHING - JWH101936 >
Master Lock® Die Cast Zinc padlock. 2 in (51 mm) wide body. 7/16 in (11 mm) Boron Shackle. 1 in (25 mm) shackle clearance. Rekeyable, 5-pin W27 cylinder. Keyed different. commercial boxed packaging, Master carton quantity 30.
1/2" X 2-1/2" Stainless Steel Socket Head Set Screws
MORSE® 14915 1398 1-Stage Type C Heavy Duty Screw Machine Aircraft Drill, #31 Drill - Wire, 0.12 in Drill - Decimal Inch, 135 deg Point, HSS
