Browning 1-7/16"-ID QD SDS-STYLE BUSHINGS BRW SDS-1-7/16
Sure-GripĀ® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-GripĀ® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood'sĀ®
-
UPC698672700566
-
Manufacturer Part NumberSDS1716
-
CountryUSA
-
MaterialSteel
-
Flange Diameter3-3/16 in
-
Flange Thickness7/16 in
-
Torque Rating5000 in-lb
-
TypeStandard
-
Screw Size1/4-20 x 1-3/8 in
-
Number of Bolt Holes3
-
Barrel Diameter2-3/16 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter2-11/16 in
-
Bore Diameter1-7/16 in
-
Overall Length1-5/16 in
- Size SDS bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Sure-GripĀ® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-GripĀ® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
36-TOOTH #40-1 CHAIN SPROCKETS IDC 40-B-36-F-1-1/4
36 TOOTH SPROCKETS FOR #40 CHAIN
36-T SPROCKETS FOR #60 CHAIN IDC 60-B-36-F-1-1/8
36 TOOTH SPROCKETS FOR #60 CHAIN
40-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-40-F-1-1/4
40 TOOTH SPROCKETS FOR #60 CHAIN
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ITW RamsetĀ® powder loads and tools match tolerances to provide optimum power within recognized national velocity standards.
