Browning 1-7/8"-ID QD SK-STYLE BUSHINGS BRW SK-1-7/8
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672701266
-
Manufacturer Part NumberSK178
-
CountryUSA
-
MaterialCast Iron
-
Flange Diameter3-7/8 in
-
Flange Thickness1/2 in
-
Torque Rating7000 in-lb
-
TypeStandard
-
Screw Size5/16-18 x 2 in
-
Number of Bolt Holes3
-
Barrel Diameter2-13/16 in
-
Keyway Size1/2 x 1/4 in
-
Bolt Circle Diameter3.313 in
-
Bore Diameter1-7/8 in
-
Overall Length1.88 in
- Size SK bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Weller® WLC200 Consumer Soldering Station, 120 V AC Input/Output, 5 to 80 W, 900 deg F
Weller® WLC200 Consumer Soldering Station, 120 VAC Input/Output, 5 to 80 W, 900 deg F
1-1/4" OVERLAP SEAL--BOX OF 1000-DUB11/4OL1000 >
INS-SC-112 Dodge® 123345 209 Normal Duty Set Screw Ball Bearing, 1-3/4 in Dia Bore, 3.3465 in OD, 1.94 in W, 7891 lb Dynamic/4906 lb Static Load
INS-SC-112 Dodge® 123345 209 Normal Duty Set Screw Ball Bearing, 1-3/4 in Dia Bore, 3.3465 in OD, 1.94 in W, 7891 lb Dynamic/4906 lb Static Load
Dichtomatik N70350 O-Ring, 350 Dash Number, 4.6 in ID x 5.02 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
7000-LB DROP LEG TOP WIND TRAILER JACK - HBC190500 >
