Browning 1-5/8"-ID QD SD-STYLE BUSHINGS BRW SD-1-5/8
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672700900
-
Manufacturer Part NumberSD158
-
CountryUSA
-
MaterialSteel
-
Flange Diameter3-3/16 in
-
Flange Thickness7/16 in
-
Torque Rating5000 in-lb
-
TypeStandard
-
Screw Size1/4-20 x 1-7/8 in
-
Number of Bolt Holes3
-
Barrel Diameter2-3/16 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter2.688 in
-
Bore Diameter1-5/8 in
-
Overall Length1.81 in
- Size SD bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
BBI 489030 Fully Threaded Carriage Bolt, 1/4-20, 3-1/2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489030 Fully Threaded Carriage Bolt, 1/4-20, 3-1/2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.
Browning® 3750379 Taper Bore Bushing, 2-15/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL
Browning® 3750379 Taper Bore Bushing, 2-15/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL
RIDGID® 36967 Model 318M Lever Bender, 180 deg
MCR Safety 3882X3 Dominator™ Concord 3882 2-Piece Rainwear suit, 3XL, Green, Polyester/PVC, 54 in Waist, 33 in L Inseam, Attached Hood
