Regal Rexnord

Browning® 1297605 Spring Clip Connecting Link, 60 Chain, 3/4 in Pitch, 1.081 in OAW, 0.234 in Dia Pin, Steel

Browning® 1297605 Spring Clip Connecting Link, 60 Chain, 3/4 in Pitch, 1.081 in OAW, 0.234 in Dia Pin, Steel

Browning® 1298009 Offset Link, 60 Chain, 3/4 in Pitch, 0.99 in OAW, 0.234 in Dia Pin

Browning® 1111947 A Plate Sprocket, 60 Chain, 40 Teeth, For Use With T45L Torque Limiters, 9.98 in OD

Browning® 1297621 Cotter Pin Connecting Link, 80 Chain, 1 in Pitch, 1.274 in OAW, 0.312 in Dia Pin, Steel

Browning® 1293570 Standard Riveted Roller Chain, 1 in Pitch, 5/8 in Dia x 5/8 in W Roller, Steel

Browning® 1298017 Offset Link, 80 Chain, 1 in Pitch, 1.274 in OAW, 0.312 in Dia Pin

Browning® 1298017 Offset Link, 80 Chain, 1 in Pitch, 1.274 in OAW, 0.312 in Dia Pin

Browning® 1297738 Cotter Pin Connecting Link, 80-2 Chain, 1 in Pitch, 1.274 in OAW, 0.312 in Dia Pin, Steel

Browning® 1293570 Standard Riveted Roller Chain, 1 in Pitch, 5/8 in Dia x 5/8 in W Roller, Steel

Morse® 089153 Large Offset Link, C-2060H Chain, 1-1/2 in Pitch, 1.207 in OAW, 0.234 in Dia Pin, Steel

Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.

Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.

Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.

Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.

Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.

Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.

Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.

Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.

Century® SD112 4-Pole Continuous Duty Motor, Totally Enclosed Fan Cooled Enclosure, 5 hp, 208 to 230/460 V, 60 Hz, 3 Phase, 184T Frame, 1758 rpm Speed, Rigid Base Mount

Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.

Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.

Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.

Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.