Regal Rexnord
Morse® 466105 TL Series Torque Limiter, 1-3/8 in Straight Bore, 5 in OD, 35 to 155 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
Morse® 466103 TL Series Torque Limiter, 1-1/8 in Straight Bore, 5 in OD, 35 to 155 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
Morse® 465704 TL Series Torque Limiter, 7/8 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
Morse® 465703 TL Series Torque Limiter, 3/4 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
Morse® 465702 TL Series Torque Limiter, 5/8 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
Morse® 331135 Slip Fit Standard Duty Connecting Link With Cotter Pin, 60 Chain, 3/4 in Pitch, 0.99 in OAW, 0.234 in Dia Pin, Steel
Connecting link standard has a removable plate with a slip fit on the pins which allows easy assembly and disassembly. Depending on pitch this may be furnished with spring clip or cotter keys.
Morse® 330806 Standard Roller Chain, 100 ft OAL, 1/2 in Pitch, 0.312 in Dia x 5/16 in W Roller, Steel
Morse® markets roller chain featuring greater resistance and increased endurance limit. Morse® shot peens its rollers to create a favorable state of compression residual stress on the surface. This process eliminates surface cracks and blemishes. The chain offered meets the standards required in the marketplace for many applications. Roller chain is available from 1/4 in pitch to 2-1/2 in pitch. Morse® offers standard roller chain in multiple widths to 8 strands up to 2 in pitch. Roller chain accessories such as connecting links are available in slip fit on the pins. This allows for easy assembly . They are also furnished with spring clip or cotter keys, depending on pitch. For heavy applications, we offer an optional connecting link. It has a removable plate with a light press fit on the pins. Regular offset links are used when a chain contains an odd number of links.
Morse® 330135 Connecting Link Set, SC-408 Chain, 1/2 in Pitch, Steel
Morse® 330135 Connecting Link Set, SC-408 Chain, 1/2 in Pitch, Steel
Morse® 330127 Connecting Link Set, SC-304 Chain, 3/8 in Pitch, Steel
Morse® 330127 Connecting Link Set, SC-304 Chain, 3/8 in Pitch, Steel
Morse® 330126 Connecting Link Set, SC-303 Chain, 3/8 in Pitch, Steel
Morse® 330126 Connecting Link Set, SC-303 Chain, 3/8 in Pitch, Steel
Morse® 329933 Inverted Tooth Silent Chain With Center Guides, 10 ft OAL, 3/8 in Pitch, Steel
Morse® silent chain is an inverted tooth type drive offering particularly smooth, quiet power transmission at higher speeds up to 5000 fpm. The exclusive Morse® rocker joint eliminates friction during chain articulation, permitting high rotative speed with less wear and heat.
Morse® 322214 Large Riveted Double Pitch Roller Chain, 10 ft OAL, 1-1/2 in Pitch, 7/8 in Dia x 1/2 in W Roller, 1/8 in THK Plate, Steel
Morse® markets roller chain featuring greater resistance and increased endurance limit. Morse® shot peens its rollers to create a favorable state of compression residual stress on the surface. This process eliminates surface cracks and blemishes. The chain offered meets the standards required in the marketplace for many applications. Roller chain is available from 1/4 in pitch to 2-1/2 in pitch. Morse® offers standard roller chain in multiple widths to 8 strands up to 2 in pitch. Roller chain accessories such as connecting links are available in slip fit on the pins. This allows for easy assembly . They are also furnished with spring clip or cotter keys, depending on pitch. For heavy applications, we offer an optional connecting link. It has a removable plate with a light press fit on the pins. Regular offset links are used when a chain contains an odd number of links.
Morse® 322088 Riveted Standard Duty Roller Chain, 10 ft OAL, 2-1/2 in Pitch, 1.562 in Dia x 1-1/2 in W Roller, Steel
Morse® markets roller chain featuring greater resistance and increased endurance limit. Morse® shot-peens its rollers to create a favorable state of compression residual stress on the surface. This process eliminates surface cracks and blemishes. The chain offered meets the standards required in the marketplace for many applications.
Morse® 2361921 Slip Fit Standard Duty Connecting Link With Spring Clip, 25 Chain, 1/4 in Pitch, 0.312 in OAW, 0.0905 in Dia Pin, Steel
Connecting link standard has a removable plate with a slip fit on the pins which allows easy assembly and disassembly. Depending on pitch this may be furnished with spring clip or cotter keys.
Morse® 2360998 Replacement Pressure Tip, For Use With Morse® #120 to 160 Chain Tool
Morse® 2360998 Replacement Pressure Tip, For Use With Morse® #120 to 160 Chain Tool
Morse® 194630 A Plate Ground Sprocket, 30 Teeth, For Use With Model 500 Torque Limiter Model, 192.79 mm OD
Morse® 194630 A Plate Ground Sprocket, 30 Teeth, For Use With Model 500 Torque Limiter Model, 192.79 mm OD
Morse® 194628 A Plate Ground Sprocket, 26 Teeth, For Use With Model 500 Torque Limiter Model, 168.4 mm OD
Morse® 194628 A Plate Ground Sprocket, 26 Teeth, For Use With Model 500 Torque Limiter Model, 168.4 mm OD
Morse® 194625 A Plate Ground Sprocket, 30 Teeth, For Use With Model 500 Torque Limiter Model, 160.53 mm OD
Morse® 194625 A Plate Ground Sprocket, 30 Teeth, For Use With Model 500 Torque Limiter Model, 160.53 mm OD
Morse® 194619 A Plate Ground Sprocket, 24 Teeth, For Use With Model 350 Torque Limiter Model, 130.05 mm OD
Morse® 194619 A Plate Ground Sprocket, 24 Teeth, For Use With Model 350 Torque Limiter Model, 130.05 mm OD
Morse® 194618 A Plate Ground Sprocket, 22 Teeth, For Use With Model 350 Torque Limiter Model, 119.89 mm OD
Morse® 194618 A Plate Ground Sprocket, 22 Teeth, For Use With Model 350 Torque Limiter Model, 119.89 mm OD
Morse® 194617 A Plate Ground Sprocket, 32 Teeth, For Use With Model 350 Torque Limiter Model, 136.65 mm OD
Morse® 194617 A Plate Ground Sprocket, 32 Teeth, For Use With Model 350 Torque Limiter Model, 136.65 mm OD
Morse® 194615 A Plate Ground Sprocket, 28 Teeth, For Use With Model 350 Torque Limiter Model, 120.4 mm OD
Morse® 194615 A Plate Ground Sprocket, 28 Teeth, For Use With Model 350 Torque Limiter Model, 120.4 mm OD
Recently Viewed
SDS Plus 2 cutter drill bits have a strong tapered core to help resist flute breaks, especially when drilling deep holes. For optimal drilling speeds, the two stage flute design features a variable helix pattern that quickly moves debris away from the contact zone. Plus, the two sharp, carbide cutting edges deliver clean, round holes for secure anchor installation. These bits are made in Germany and are GUARANTEED TOUGH® - so tough that we are offering a NO BREAK GUARANTEE. If you have our bits, we have your back.
