RBC Bearings Incorporated
Nice® 1607DSTNTG18 1600® Non-Fill Slot Precision Deep Groove Ball Bearing, 7/16 in Dia Bore, 0.9063 in OD, 1 Rows, 5/16 in W, 300 lb Load
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Nice® 1614DSTNTG18 1600® Non-Fill Slot Precision Deep Groove Ball Bearing, 3/8 in Dia Bore, 1-1/8 in OD, 1 Rows, 3/8 in W, 475 lb Load
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Nice® 1620DCTNTG18 1600® Non-Fill Slot Precision Deep Groove Ball Bearing, 7/16 in Dia Bore, 1-3/8 in OD, 1 Rows, 7/16 in W, 850 lb Load
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Nice® 5368VMF53 5000® Round Bore Unground Flanged Radial Ball Bearing, 3/8 in Dia Bore, 1-1/8 in OD, 1 Row, 0.437 in W, 200 lb Load
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Nice® 5418VMF53 5000® Round Bore Unground Flanged Radial Ball Bearing, 1 in Dia Bore, 2 in OD, 1 Row, 0.718 in W, 757 lb Load
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Nice® 5491VMF53 5000® Round Bore Unground Flanged Radial Ball Bearing, 1/2 in Dia Bore, 1-1/8 in OD, 1 Row, 0.437 in W, 200 lb Load
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Nice® 5875VMF53 5000® Round Bore Unground Flanged Radial Ball Bearing, 3/4 in Dia Bore, 2 in OD, 1 Row, 0.572 in W, 757 lb Load
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Nice® 608VBF53 600® Unground Thrust Bearing, 0.9 in Dia Bore, 1.89 in OD, 0.594 in W, 1326 lb Load
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
Nice® 610VBF53 600® Unground Thrust Bearing, 1.031 in Dia Bore, 1.9688 in OD, 5/8 in W, 1404 lb Load
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
Nice® ER20 ER Series Non-Fill Slot Precision Deep Groove Ball Bearing With Extended Inner Ring, 1-1/4 in Dia Bore, 2.835 in OD, 1 Rows, 1-11/16 in W, 5755 lb Load
Nice® ER20 ER Series Non-Fill Slot Precision Deep Groove Ball Bearing With Extended Inner Ring, 1-1/4 in Dia Bore, 2.835 in OD, 1 Rows, 1-11/16 in W, 5755 lb Load
RBC® 6NBF817YJ NBF Airframe Bearing, Needle Roller Bearing, 3/8 in Dia Bore, 1-1/16 in OD, 1/2 in W, 3600 lb Load
RBC® 6NBF817YJ NBF Airframe Bearing, Needle Roller Bearing, 3/8 in Dia Bore, 1-1/16 in OD, 1/2 in W, 3600 lb Load
RBC® B14-L B-L Series Spherical Plain Bearing, 7/8 in Dia Bore, 1-7/16 in OD, 0.765 in W, 28800 lb Load
RBC® has been a pioneer in spherical plain bearing technology since inventing the fractured outer race design many years ago. Since that time, RBC® has continued to introduce industry leading innovations such as high misalignment, angular contact, extended inner ring, tapered bore, and extended lubrication groove spherical plain bearing designs.
RBC® B20-L B-L Series Spherical Plain Bearing, 1-1/4 in Dia Bore, 2 in OD, 1.093 in W, 58800 lb Load
RBC® has been a pioneer in spherical plain bearing technology since inventing the fractured outer race design many years ago. Since that time, RBC® has continued to introduce industry leading innovations such as high misalignment, angular contact, extended inner ring, tapered bore, and extended lubrication groove spherical plain bearing designs.
RBC® B24-L B-L Series Spherical Plain Bearing, 1-1/2 in Dia Bore, 2-7/16 in OD, 1.312 in W, 84800 lb Load
RBC® has been a pioneer in spherical plain bearing technology since inventing the fractured outer race design many years ago. Since that time, RBC® has continued to introduce industry leading innovations such as high misalignment, angular contact, extended inner ring, tapered bore, and extended lubrication groove spherical plain bearing designs.
RBC® CamCentric® S24LWX S-LWX Needle Roller Cylindrical Cam Follower With Eccentric Outer Ring, 3/4 in Dia x 1/2 in W Roller, 1/2 in Dia x 7/8 in L Stud, Chrome Steel Roller
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC® CamCentric® S32LWX S-LWX Needle Roller Cylindrical Cam Follower With Eccentric Outer Ring, 1 in Dia x 5/8 in W Roller, 5/8 in Dia x 1 in L Stud, Chrome Steel Roller
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC® CY32L Universal Series™ Yoke Cylindrical Roller Cam Follower, 5/16 in Dia Bore, 1 in Dia x 5/8 in W Roller, 6150 lb Load, Chrome Steel Roller
RBC® CY32L Universal Series™ Yoke Cylindrical Roller Cam Follower, 5/16 in Dia Bore, 1 in Dia x 5/8 in W Roller, 6150 lb Load, Chrome Steel Roller
RBC® CY44L Universal Series™ Yoke Cylindrical Roller Cam Follower, 3/8 in Dia Bore, 1-3/8 in Dia x 3/4 in W Roller, 8500 lb Load, Chrome Steel Roller
RBC® CY44L Universal Series™ Yoke Cylindrical Roller Cam Follower, 3/8 in Dia Bore, 1-3/8 in Dia x 3/4 in W Roller, 8500 lb Load, Chrome Steel Roller
RBC® HexLube® CS24LW CS-LW Needle Roller Crowned Cam Follower, 3/4 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, Chrome Steel Roller
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC® HexLube® CS32LW CS-LW Needle Roller Crowned Cam Follower, 1 in Dia x 5/8 in W Roller, 7/16 in Dia x 1 in L Stud, Chrome Steel Roller
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC® HexLube® CS48LW CS-LW Needle Roller Crowned Cam Follower, 1-1/2 in Dia x 7/8 in W Roller, 5/8 in Dia x 1-1/2 in L Stud, Chrome Steel Roller
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC® HexLube® CS64LW CS-LW Needle Roller Crowned Cam Follower, 2 in Dia x 1-1/4 in W Roller, 7/8 in Dia x 2 in L Stud, Chrome Steel Roller
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC® HexLube® H16LW H-LW Needle Roller Cylindrical Cam Follower, 1/2 in Dia x 3/8 in W Roller, 1/4 in Dia x 5/8 in L Stud, Chrome Steel Roller
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC® HexLube® H20LW H-LW Needle Roller Cylindrical Cam Follower, 5/8 in Dia x 0.438 in W Roller, 5/16 in Dia x 3/4 in L Stud, Chrome Steel Roller
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
Recently Viewed
3" X 4.1-YDS CONFORMING GAUZE-OFIM21912 >
3" X 3" GAUZE DRESSING PADS--BX/25-OFII212 >
