RBC Bearings 1-1/8"-ID NEEDLE BEARINGS RBC SJ-7215
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
-
BrandRBC®
-
UPC637400014728
-
Manufacturer Part NumberSJ7215
-
CountryUSA
-
Load Capacity17300 lb
-
Cage MaterialSteel
-
Temperature Rating-40 to 300 deg F
-
Maximum Speed12000 rpm
-
Closure TypeOpen
-
TypeHeavy Duty
-
Width1-1/4 in
-
SeriesPitchlign® SJ Series
-
Number of Rows1
-
Bearing Material52100 Steel
-
Outside Diameter1-5/8 in
-
Bore Diameter1-1/8 in
- Long life, caged roller bearing
- Rollers guided by cage for reduced misalignment and reduced friction
- Precision ground on all surfaces
- Compact design allows for high load capacity and small cross section
- Unsealed design for maximum capacity
- 9400 lb dynamic/17300 lb static
-
UNSPSC31171512
-
Package Description1/PK
-
Standards/ApprovalsASPR|CAS|DFAR|FAR Standards|MS51961
-
Warranty90 Days
-
Catalog
Recently Viewed
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
Smith Bearing® MYR-15-S Caged Crowned Single Row Yoke Type Needle Bearing Cam Follower, 15 mm Dia Bore, 35 mm Dia x 18 mm W Roller, 52100 Steel Roller
Metric yoke type needle roller bearings are recommended where running loads and shock loads are moderate. Manufactured from high alloy bearing quality steel. (Unsealed - MYR Series, Sealed - MYR-S Series) for straight cylindrical outside roller diameter.
FILTER ELEMENT
IKO BA2020ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 1-1/4 in Dia Bore, 1-1/2 in OD, 1 Row, 1-1/4 in W, 26900 N Dynamic/59200 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Campbell® T5950324 Repair Link, 1/4 x 1-1/4 in Trade, 400 lb Load, Low Carbon Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
DRILL CHUCK KEY-MWK48662110 >
