Gulf Bearing 3/8" DOUBLE-SHIELDED BALL BEARINGS GUL 1614-2-Z
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
-
BrandNice®
-
UPC637400291426
-
Manufacturer Part Number1614DSTNTG18
-
CountryUSA
-
Load Capacity475 lb
-
Cage MaterialNylon
-
Temperature Rating-40 to 284 deg F
-
FinishChrome Steel
-
Maximum Speed5000 rpm
-
Closure TypeDouble Shield
-
TypeNon-Fill Slot
-
Width3/8 in
-
Series1600®
-
Number of Rows1
-
Bearing Material52100 Steel
-
Outside Diameter1-1/8 in
-
Bore Diameter3/8 in
- Precision ground on all surfaces and ball grooves for smooth rotation and easy installation
- Pregreased with metered Shell Alvania #2 grease
- Double sealed to keep grease in and contaminants out
- Standard design for maximum application versatility
- 1200 lb dynamic/475 lb static
-
UNSPSC31171504
-
Package Description1/PK
-
Standards/ApprovalsABEC-1|ASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
Gulf Bearing 3/8" DOUBLE-SHIELDED BALL BEARINGS GUL 1614-2-Z
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Dichtomatik N70116 O-Ring, 116 Dash Number, 0.737 in ID x 0.943 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
NEMESIS SAFETY GLASSES: BLACK FRAME SMOKE AF-AMS3020121 >
ANTI-FATIGUE FINGERLESS SMALL RIGHT GLOVE-OK1OKGAVSR>
BLACK SILICONE TAPE-GNT66260 >
