NSi Industries
Remke 1" ELECTRICAL CORD GRIPS REM RSR-309
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Remke 1" ELECTRICAL CORD GRIPS REM RSR-311
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Remke 1" ELECTRICAL CORD GRIPS REM RSR-313
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Remke 1" ELECTRICAL CORD GRIPS REM RSR-315
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Remke 1/2" STRAIT .125"-.188" CORD GRIPS REM RSR-103
Remke Tuff-Seal™ RSR-103 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 0.125 to 0.188 in Cable Openings, Aluminum, Nickel Plated
Remke 1/2" STRAIT .188"-.250" CORD GRIPS REM RSR-104
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Remke 1/2" STRAIT .312"-.375" CORD GRIPS REM RSR-106
Remke Tuff-Seal™ RSR-106 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 2, 3, 4 Conductors, 0.312 to 0.375 in Cable Openings, Aluminum, Nickel Plated
Remke 1/2" STRAIT .375"-.438" CORD GRIPS REM RSR-107
Remke Tuff-Seal™ RSR-107 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 3, 4 Conductors, 0.375 to 0.438 in Cable Openings, Aluminum, Nickel Plated
Remke 1/2" STRAIT .438"-.500" CORD GRIPS REM RSR-108
Remke Tuff-Seal™ RSR-108 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 0.438 to 0.5 in Cable Openings, Aluminum, Nickel Plated
Remke 1/2" STRAIT .562"-.625" CORD GRIPS REM RSR-110
Remke Tuff-Seal™ RSR-110 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 2, 3, 4 Conductors, 0.562 to 0.625 in Cable Openings, Aluminum, Nickel Plated
Remke 3" STRAIN RELIEF REM RSR-8739-E
Remke Tuff-Seal™ RSR-8739-E Form Size 7 Straight Cord Grip Connector With Stainless Steel Mesh, 3 in Trade, 2.312 to 2.438 in Cable Openings, Aluminum
Remke 3/4" STRAIT .438"-.562" CORD GRIPS REM RSR-209
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Remke 3/4" STRAIT .562"-.688" CORD GRIPS REM RSR-211
Remke Tuff-Seal™ RSR-211 Form Size 3 Straight Cord Grip Connector With Locknut, O-Ring, 3/4 in Trade, 2, 3, 4 Conductors, 0.568 to 0.688 in Cable Openings, Aluminum, Nickel Plated
Remke 3/4" STRAIT .625"-.750" CORD GRIPS REM RSR-212
Remke Tuff-Seal™ RSR-212 Form Size 3 Straight Cord Grip Connector With Locknut, O-Ring, 3/4 in Trade, 3, 4 Conductors, 5/8 to 3/4 in Cable Openings, Aluminum, Nickel Plated
Remke 3/4" STRAIT .688"-.812" CORD GRIPS REM RSR-213
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Remke CLOSED SINGLE EYE ELEC/CORD GRIPS REM 2201-013
Tuff-Seal™ Support Grips are designed to hold the weight of cable that is vertical or sloping. Support grips serve an important function; electrical cables must be supported or their dead weight can cause excessive strain or pullout at the connections resulting in power failure. Tuff-Seal™ Support Grips are woven with non-magnetic, tinned bronze wire that absorbs strain and flexing while resisting cable pull-out, flexing and vibration. These grips are available in a variety of eye styles and cable ranges, can be used either indoors or outdoors and will support cable, metal rods and tubing with loads up to 600 lb.
Remke CLOSED SINGLE EYE ELEC/CORD GRIPS REM 2201-015
Remke Tuff-Seal™ 2201-015R Closed Mesh Single Eye Single Weave Standard Support Grip, 1020 lb Breaking Strength, 0.75 to 0.99 in Cable, Bronze, TiN Coated
Remke MESH ELECTRICAL CORD GRIPS REM 7303-014
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke MESH ELECTRICAL CORD GRIPS REM 7303-015
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke NPS WIDE RANGE SRP MES CORD GRIPS REM 7303-012
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke NPS WIDE RANGE SRP MESH CORD GRIPS REM 7303-008
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke NPS WIDE RANGE SRP MESH CORD GRIPS REM 7303-009
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke NPS WIDE RANGE SRP MESH CORD GRIPS REM 7303-010
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke NPS WIDE RANGE SRP MESH CORD GRIPS REM 7303-011
Tuff-Seal™ strain relief grips are used to connect cord or cable to electrical enclosures and equipment, power boxes, portable power tools, panel boards and machine tools. For indoor use only in dry locations, these grips help control arc-of-bend and prevent cable pull-out and damage resulting from flexing. Strain is distributed over the length of these grips instead of at a single point. These tuff seal strain relief grips are made with a single-weave, galvanized steel mesh and feature aluminum fittings and a gasket that provides an environmental seal against dust, filings and other foreign material.
Recently Viewed
A GALVANIZED HARD DRAWN EXTENSION SPRING WITH AN OUTSIDE DIAMETER OF 0.500" AND AN OVERALL LENGTH OF 6.00"
-AJA42 >
THE ARC ABRASIVES MOUNTED FLAP WHEEL IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: GRINDING, DEBURRING AND FINISHING. PERFECT FOR USE ON MILD STEEL AND ALUMINUM.
-ARC11289 >
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
12 IN NO-TIP STOOL -WER1761 >
8-MM X 1.25 THREAD INSERTS-EZL6508>
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
