Remke Tuff-Seal™ RSR-104 Straight Cord Grip Connector, 1/2 in Trade, 0.188 to 0.25 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
-
BrandRemke
-
UPC785411111049
-
Manufacturer Part NumberRSR-104
-
CountryUSA|Canada
-
Cable Openings0.188 to 0.25 in
-
Temperature Rating-40 to 149 deg C
-
MaterialAluminum
-
Trade Size1/2 in
-
Connection TypeMNPT x Compression
-
SeriesRSR
- Combination hex and knurled tightining surface for faster installation
- Optional stainless steel wire mesh for added strain relief
- Optional embedded BUNA-N O-ring option for watertight, corrosion-resistant seal
- Anti-friction washer for easier compression and secure fit
- Metallic composition
- NEMA 3, NEMA 3R, NEMA 4, NEMA 6 and NEMA 12 enclosure
- IP52, IP54, IP65, IP67 IEC rating
- Form size 2
- Suitable for use in corrosive environments
- Tuff-Seal™ RSR cord grips protect cable from damage and pull-out and are used in conduit hubs or knockouts at the point where the electrical cable is to be terminated, suitable for use in corrosive environments
-
Alternative Part Number20869973
-
UNSPSC39121431
-
IDEA Index ID20869973
-
Package DescriptionEACH
-
Standards/ApprovalsRoHS Compliant|WEE Compliant|UL File No. E53599|CSA File No. 28985|NEC Article 400-10|UL94 V-2 Flammability Rating
-
Warranty1 Year
-
Catalog
-
Owners/User Manual
-
Full Engineering Drawing
Recently Viewed
Remke Tuff-Seal™ RSR-104 Straight Cord Grip Connector, 1/2 in Trade, 0.188 to 0.25 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
SUPER STRENGTH CLEANER AND DEGREASER. NONTOXIC, BIODEGRADABLE DETERGENTS THAT FORM A POWERFUL, NONFLAMMABLE PROFESSIONAL CLEANER. CONCENTRATED. GENTLE ENOUGH TO CLEAN FABRIC AND UPHOLSTERY, YET POWERFUL ENOUGH TO TACKLE HEAVY DUTY PROBLEMS LIKE ENGINES, EQUIPMENT, AND OUTDOOR STAINS. PHOSPHATE FREE.
JWH646342>
Gates® Power Transmission Tri-Power® PowerBand® 4/BX112 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 115.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
The M18 FUEL™ blower has the power to clear from 15 ft, gets to full throttle in under 1 second, and is up to 4 lbs lighter than competitors. Designed to meet landscape maintenance professional needs, the POWERSTATE™ brushless motor and REDLITHIUM™ HIGH DEMAND™ 9.0 battery (sold separately) deliver 450 CFM and 120 mph output. The blower features a variable speed trigger and high/low speed settings for increased control. The high setting is for the most demanding applications and low is optimized for clearing debris from flower beds without moving mulch. The lock on button allows the blower to be locked on to full throttle, so the operating hand can be relaxed reducing fatigue. The M18 FUEL™ blower is fully compatible with 150+ solutions on the M18™ system.
The EXTREME all weather extension cord is constructed of 100% TPE (thermo plastic elastometer) compound which allows the cord to stay flexible in the most extreme climates without affecting the cord's performance. The TPE compound provides a lightweight, tangle free construction to the EXTREME cord, not commonly found on most standard PVC cords. Tested in some of the harshest weather conditions in Alaska, the EXTREME all weather extension cord is designed for durability to last a lifetime.
MasterDrive R2-60MM R2 Series Double Split Tapered Bushing, 60 mm Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 4-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
