Remke Tuff-Seal™ 7303-002R Closed Mesh Non-Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.3 to 0.43 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
-
BrandRemke
-
UPC785411102177
-
Manufacturer Part Number7303-002R
-
CountryUSA|Canada
-
Cable Size0.3 to 0.43 in
-
MaterialAluminum
-
Mesh Length3-1/4 in
-
TypeClosed Mesh Non-Insulated Single Weave Wide Range
-
Suitable For Use With1/2 in NPT Connector
- Stainless steel or galvanized steel wire mesh for strength and corrosion resistance
- Designed to absorb vibration, movement, and tension to protect conductors
- Compatible with Bridgeport cord grips and connectors for added securement
- Engineering Solutions available - custom mesh lengths, materials, and eye configurations
- Adjusts to wide range of cable or cord diameters, so fewer grips are needed to fit many cable sizes
- Readily installed, adjusted, repositioned, removed or reused
- Makes relocating plant wiring and machines easy
- Automatically adjust their gripping to hold the required load
- No special installer skill or special tools required
- Wire mesh grips are available in a wide selection of cable ranges and eye styles
-
Alternative Part Number20869952
-
UNSPSC39121725
-
IDEA Index ID20869952
-
Package DescriptionEACH
-
Standards/ApprovalsRoHS Compliant|UL 94-HB Flammability Rating
-
RoHS
-
Catalog
Recently Viewed
Remke Tuff-Seal™ 7303-002R Closed Mesh Non-Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.3 to 0.43 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Dichtomatik 75102029 O-Ring, 034 Dash Number, 2.114 in ID x 2.254 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dodge® 124462 204 Normal Duty Pillow Block Ball Bearing Unit, 3/4 in Dia Bore, 2 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 2.88 in OAL x 2.56 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
Drillco 75A108C 7500 Center Cutting Double End Imperial Stub Length Finishing End Mill, 1/8 in Dia Cutter, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Gates® Power Transmission PowerGrip® GT®3 960-8MGT-12 Synchronous Belt, 12 mm W, 960 mm OAL, 8 mm Pitch, 120 Teeth, Neoprene
Engineered with the latest in advanced technology and materials science expertise, Gates PowerGrip™ GT4 delivers the highest power-carrying capacity of any belt in its class. In addition, Gates designed a belt with increased chemical resistance and larger temperature range capability. Gates PowerGrip GT4 belt delivers improved performance over a wide range of industrial applications. The 8MGT and 14MGT pitches are the optimum choice for high performance drives in the machine tool, paper and textile industries where durability and low maintenance are required. From resource processing to heavy manufacturing, automated production to custom assembly — Gates PowerGrip GT4 solutions improve uptime, efficiency, productivity, reliability and safety for industries around the world.
PBE-920 1-3/8"-ID 2-bolt Trb Pillow Block
1-3/8"-ID 2-BOLT TRB PILLOW BLOCK
