L.S. Starrett
Starrett GAGE HOLDING ROD WITH CLAMP MECH STR PT-06784-A
Standard gage holding rod on the 657D mag base, various 657E combinations with indicators, 252 transfer stands and 665 inspection holders. Rod dimensions 3/8" x 9-1/2" (9.5 x 240mm) with clamping mechanism for gripping the indicator lug back.
Starrett HALF ROUND PROTRACTORS STR 193
This protractor can be used with the 47 and 49 universal bevels by setting them against the revolving stud, which quickly and economically converts them into bevel protractors. Protractor has double graduations from 0-180 deg in opposite directions.
Starrett HIDDEN BLADE UTILITY KNIFES STR S-011
The Hidden Edge Utility Knife keeps the blade safely tucked away when not in use, yet instantly available by simply releasing the safety lock and squeezing the lever to the knife body. The cutting depth is easily and accurately adjusted with a thumb wheel. With a quick release, the blade changes and spares are stored in the lever. Blade changes are fast and tool-free and do not require disassembling.
Starrett HOLDING NUT .375-40 STR PT-16499
100 Ft. Coil, Advanz™ CG Carbide Grit Band Saw Blade Material - 3/4" width, .032" thickness, Continuous edge, Carbide Medium Grit. Made with a tungsten carbide grit bonded to an alloy back. Cuts through many hard or abrasive materials that conventional tooth blades won't cut.
Starrett MICROMETER DEPTH GAGES/GAUGES STR 449-BZ-6-R
The Starrett 449, 449M Series Micrometer Depth Gage with Non-Rotating Blade includes a .045" thick x 1/8" wide (1.2 x 3.2mm) blade that can be turned with the fingers and positioned at any angle relative to the base. In operation, the blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off. This is also ideal for slots and recesses as narrow as .045" (1.2mm). Furnished with a 2-1/2" (63mm) or a 4" (100mm) base. 0-6" Range, .001" Grad, 4" Base, 6 Rods, in Case.
Starrett MICROMETER STR T-216-XRL-1
The Starrett 216 Digital Micrometer is a mechanical digital micrometer - simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). 1", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
Starrett MICROMETERS STR T-230-XFL
The Starrett T230XFL Outside Micrometer includes 0-1" range, friction thimble, lock nut, carbide face, 0-1" Range, .0001" Grad, Carbide Faces, Friction Thimble, Lock Nut.
Starrett MICROMETERS/CALIPERS STR 230-MRL
Starrett® K230MRL Mechanical Outside Micrometer
Starrett MILLIMETERS THICKNESS GAGES/GAUGES STR 467-M
The Starrett Metric Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. Thickness Gage, .0.04-5.0mm Range, 13 Leaves.
Starrett NEW STYLE SQUARE LOCK BOLTS STR PT-99006
Lock bolt Assembly.
Starrett PIN VISES STR 162-A
The Starrett 162 Pin Vise feature small handles that allow you to rapidly rotate between thumb and finger when filing small work. .010-.040" (0.25-1mm) Range work.
Starrett PIN VISES STR 162-D
The Starrett 162 Pin Vise feature small handles that allow you to rapidly rotate between thumb and finger when filing small work. .115-.187" (2.9-4.8mm) Range work.
Starrett PIN VISES STR 240-B
The Starrett 240 Double End Pin Vise includes tapered collets. .025-.075" (0.64-1.9mm) Range.
Starrett RADIUS GAGES STR 178-MA
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 34 Leaves, 1-7mm Range, 0.25mm/0.5mm increments.
Starrett SATIN CHROME CENTER GAGES STR C-391
The Starrett C391 Center Gage features inch graduations, meets the American Unified National Standard and US 60 degree standards. American unified National Standard, 60 Deg.
Starrett SATIN CHROME PROTRACTORS STR C-183
The Starrett C183 Steel Protractor is a highly useful and accurate tool for setting bevels, transferring angles, small squaring tasks, checking cutter clearances within certain limits, and many other applications. Includes double graduations from 0-180 Deg in opposite directions permitting the direct reading of angles and supplementary angles. The back of the tool is flat for ease of use. The blade can be locked firmly at any angle by the lock nut. The protractor also includes a satin chrome finish for ease of reading and resistance to rust. 6" (0-180 Deg) with Rectangular Head.
Starrett SCREW GAGES STR 284
The Starrett 284 Acme Standard Screw Thread Gage is a standard for grinding and setting tools when cutting Acme threads, which have the same depth as square threads but the sides of the threads are at an inclination of 14-1/2 Deg (29 Deg included angle). This form of thread is used extensively and has in many instances replaced the square thread in machine construction. The advantages of the Acme thread is its strength and the ease by which it can be cut compared with square threads.
Starrett SCREW PITCH GAGE 30-LEAF(4-42 TPI) STR 6
The Starrett 6 Screw Pitch Gage includes a substantial steel case, a number of folding leaves at both end, and 30 leaves. This model features a 4-42 TPI range.
Starrett SCREW PITCH GAGES 28-LEAF .25-2.50 STR 156-M
The Starrett 156M Screw Pitch Gage includes locking device, 28 leaves, and 0.25-2.50mm range. 60 Deg Threads.
Starrett SCRIBERS STR 70-A
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett SCRIBERS STR 70-B
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett SCRIBERS W/TUNGSTEN CARBIDE POINT STR 70-AX
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett SCRIBERS W/TUNGSTEN CARBIDE POINTS STR 70-BX
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett SNUG SLEEVE COMPLETE STR PT-18718
Post hole has a 5/16" diameter and 3/32-1/4" holding capacity. Can be used on our 252 Height Transfer Gage, 57 and 257A and B Surface Gages, on 657A Magnetic Base and Swivel Post Assembly.
Recently Viewed
Crimp connectors from IDEAL® are designed for making fast, permanent, pressure-type connections. Whether there is a connection in a high vibration environment or installations at an OEM, there is a solution available. The steel and copper crimp connectors cover a wide range of combinations and have available insulating caps to protect against dangerous electrical shock.
UNIVERSAL JOINTS-U-JOINTS-CHIUJ505>
1/8" X 4" ZINC COATED PEGHOOKS-SOUT214S >
HB-80-A-12X3/4 12 Tooth #80 Chain Idler
12 TOOTH #80 CHAIN IDLER SPROCKETS-BRWHB80A12X3/4 >
Proto® J6202A Torque Multiplier, 4:1 Gear Ratio, 1:3.33 Torque Ratio, 1/2 in Square Female x 3/4 in Square Male Drive, 8-17/32 in OAL, 250 ft-lb Max, 750 ft-lb Max, Tubular Bar
Armstrong® 25-208 Long Length Open End Combination Wrench, 1/4 in, 12 Points, 15 deg Offset, 5 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-208 Long Length Open End Combination Wrench, 1/4 in, 12 Points, 15 deg Offset, 5 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
