L.S. Starrett
Starrett® 1010Z Flat Contact Pocket Dial Gage, 3/8 in, Graduations: 0.001 in, 1/2 in D Throat, Steel
Handy pocket gage is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" or 9mm thick. The gage fits naturally in the curve between the thumb and index finger. A slight pull on the serrated top plate raises the spindle. 0-.375" Range, 0-100 Dial, .001" Grad, Flat Contacts.
Starrett® 1015B Portable Dial Hand Gage, 1 in, Graduations: 0.001 in, 1/4 in Dia Flat Contact, 2-1/2 in D Throat
After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the user. 1" Range, 0-100 Dial, .001" Grad, without Case.
The Starrett 117 Center Punch is made of specially selected steel, hardened and properly tempered. It is well proportioned, nicely finished and has a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. 3" (75mm) Length, 1/16" (1.5mm) Point Diameter.
The Starrett 117 Center Punch is made of specially selected steel, hardened and properly tempered. It is well proportioned, nicely finished and has a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. 4" (100mm) Length, 1/8" (3mm) Point Diameter.
Starrett® 11H-12-4R Combination Square Set, 2 Pieces, 12 in L, Hardened Steel Blade, Square Head
Starrett® 11H-12-4R Combination Square Set, 2 Pieces, 12 in L, Hardened Steel Blade, Square Head
Starrett® 11H-18-4R Combination Square Set, 2 Pieces, 18 in L, Hardened Steel Blade, Square Head
The Starrett 18" Combination Square with Square Head features a reversible lock bolt, scriber, spirit level, and hardened steel, photo-engraved blade with regular This product also includes a cast iron head with black wrinkle finish. 18", 4R Grad, Regular Blade.
Starrett® 11H-6-4R Combination Square Set, 2 Pieces, 6 in L, Hardened Steel Blade, Square Head
Starrett® 11H-6-4R Combination Square Set, 2 Pieces, 6 in L, Hardened Steel Blade, Square Head
Starrett® 11MEH-300 Combination Square Set, 2 Pieces, 11-3/4 in L, Hardened Steel Blade, Square Head
Starrett® 11MEH-300 Combination Square Set, 2 Pieces, 11-3/4 in L, Hardened Steel Blade, Square Head
Starrett® 120A-6 Accurate Direct Reading Reliable Dial Caliper With Plastic Case, 0 to 6 in, Graduation 0.001 in, 5/8 in Inside x 1-1/2 in Outside D Jaw, Stainless Steel, Satin
The 120 Dial Calipers are the only American made dial calipers. These calipers are used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making these one of the handiest measuring tools available. This caliper has a 0-6" range and .001" graduations with a white dial. Ships in a fitted plastic case.
Starrett® 124BZ Solid Rod Inside Micrometer Set, 2 to 12 in, Graduations: 0.001 in, Steel
The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 50-75mm (2-3") rods). Rod diameters are approximately 6mm (1/4") on the A and B sizes, and approximately 8.5mm (11/32") on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 2-12" Range, .001" Grad, 10 Measuring Rods with Case.
Starrett® 124CZ Solid Rod Inside Micrometer, 8 to 32 in, Graduations: 0.001 in, Steel
The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3" and the 50-75mm rods). Rod diameters are approximately 1/4" (6mm) on the A and B sizes, and approximately 11/32" (8.5mm) on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 8-32" Range, .001" Grad, 4 Measuring Rods with Case.
Starrett® 136 Cross Test Level, 2-3/4 in L x 2-3/4 in W, (2) Level/(3) Plumb Vial Position, Cast Iron
The Starrett 136 has two vials at right angles which permit leveling in both directions without moving the level from the work.
Starrett 13 squares are very popular with machinists, toolmakers, and patternmakers. The sliding blades are adjustable making it practical for a wide variety of uses. The faces of the head are ground square. 4" Satin Chrome Finish Graduated Blade.
Starrett® 156M Screw Pitch Gauge, 0.25 to 2.5 mm Measuring, 28 Leaves, Steel
The Starrett 156M Screw Pitch Gage includes locking device, 28 leaves, and 0.25-2.50mm range. 60 Deg Threads.
Starrett® 1612 Rule Case With Pocket Clip, 6-3/4 in H x 7/8 in W x 3/32 in D, Vinyl
Starrett® 1612 Rule Case With Pocket Clip, 6-3/4 in H x 7/8 in W x 3/32 in D, Vinyl
Starrett® 1620 Tool and Instrument Oil, 4 oz Drip Can, Odorless Oil, Fluid, Pale Yellow
Instrument oil is an extra-fine lubricant made to our specifications and used in our factory to lubricate and protect our precision measuring tools and instruments.
Starrett® 162A Regular Pin Vise, 0 to 0.04 in Capacity, 5/16 in Dia x 3-3/32 in L, Knurled Grip Handle
The Starrett 162 Pin Vise feature small handles that allow you to rapidly rotate between thumb and finger when filing small work. .010-.040" (0.25-1mm) Range work.
Starrett® 162B Regular Pin Vise, 0.03 to 0.062 in Capacity, 3/8 in Dia x 3-35/64 in L, Knurled Grip Handle
The Starrett 162 Pin Vise feature small handles that allow you to rapidly rotate between thumb and finger when filing small work. .030-.062" (0.8-1.6mm) Range work.
Starrett® 162D Regular Pin Vise, 0.115 to 0.187 in Capacity, 17/32 in Dia x 4-5/64 in L, Knurled Grip Handle
The Starrett 162 Pin Vise feature small handles that allow you to rapidly rotate between thumb and finger when filing small work. .115-.187" (2.9-4.8mm) Range work.
The Starrett English Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. These gages are Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. 8 Tapered Leaves, 1/2-1/4 x 6", inch reading, .002-.015" Range.
Starrett® 178A Fillet/Radius Gage With Locking Device, 1/32 to 1/4 in, 30 Leaves, Stainless Steel
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 30 Leaves, 1/32-1/4" Range, 64ths increments.
Starrett® 178B Fillet/Radius Gage With Locking Device, 17/64 to 1/2 in, 32 Leaves, Stainless Steel
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 32 Leaves, 17/64-1/2" Range, 64ths increments.
Starrett® 178MA Fillet/Radius Gage With Locking Device, 1 to 3 mm, 34 Leaves, Stainless Steel
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 34 Leaves, 1-7mm Range, 0.25mm/0.5mm increments.
Starrett® 18A Automatic Center Punch With Adjustable Stroke, 9/16 in Tip, 5 in OAL, Steel Tip
The Starrett Automatic Center Punch with Adjustable Stroke features a lightweight, knurled steel handle for a positive grip and easy handling. 125mm (5") Length, 14mm 9/16" Diameter.
Recently Viewed
1/2"-20 SAE Stainless Steel Hex Nuts
1/4"-20 USS Nylon Hex Nuts
Square D™ EHB14020 Molded Case Circuit Breaker, 480Y/277 V AC, 20 A, 14 kA Interrupt, 1 Poles, Thermal Magnetic Trip
Square D™ EHB14020 Molded Case Circuit Breaker, 480Y/277 VAC, 20 A, 14 kA Interrupt, 1 Poles, Thermal/Magnetic Trip
Greenlee® 435 Measuring Tape, 3000 ft L x 3/16 in W Blade, Waterproof Polyester, Imperial
Greenlee® 435 Measuring Tape, 3000 ft L x 3/16 in W Blade, Waterproof Polyester, Imperial
Starrett® Exact® 530JT-50 Global Series® Long Measuring Tape, 50 ft L x 3/8 in W Blade, Steel Blade, Imperial Measuring System, 1/8 in Graduation
The closed reel steel long tape features a classic vinyl clad steel case design with a rugged rewind mechanism for single user convenience and nylon rollers at case opening to reduce blade wear and for sustained field use. Blades are produced with high visibility, easy-to-read graduations, and a folding hook ring. One side in inch diameter (pi) measurements with 100th vernier scale and the other side is graduated in 1/8" and numbered in consecutive inches to each foot and repeat.
2" USS 2-H Zinc Heavy Hex Nuts
