L.S. Starrett
Starrett 3-1/4" MAGNETIC-BASE ANGLE METERS STR AM-2
Angle Meter provides large readable scale for accurate readings from 0 Deg to 90 Deg in any quadrant. Integral magnetic base frees hands when used on ferrous surfaces. Meter measures any angle for pitch or slope and provides handy rise, run, angle and pitch information on back of the tool.
Starrett 3"END MEASURING ROD W/RUBBER HANDLE STR 234-A-3
Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 3" with Insulated Handle.
Starrett 3/16" PIN PUNCHES STR 248-B
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 5mm (3/16") Diameter.
Starrett 3/16"-TIP X 4"-LENGTH PIN PUNCHES STR 565-E
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 5mm (3/16") Diameter.
Starrett 3/32"-TIP X 4"-LENGTH PIN PUNCHES STR 565-B
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 2.5mm (3/32") Diameter.
Starrett 3/4" X 25' TAPE MEASURES STR CH-34-25
Starrett® 65940 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 25 ft L x 3/4 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Starrett 3/4"-1" INT MICROMETER BORE GAGE STR 78-XTZ-1
The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact points seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12" (1-300mm). 3/4-1" Range, w/3 Point Carbide Contact.
Starrett 3/8" X 50' STEEL TAPES STR HY-505-50
The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3" and the 50-75mm rods). Rod diameters are approximately 1/4" (6mm) on the A and B sizes, and approximately 11/32" (8.5mm) on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 8-32" Range, .001" Grad, 4 Measuring Rods with Case.
Starrett 3/8"X100' YELLOW STEEL TAPE W/HOOK STR HY-530-100
The steel long-line measuring tape replacement blade features a tough-baked yellow enamel-coated line for Starrett 530 Series 100 foot tapes.
Starrett 35' X 1" CERTIFIED TAPE MEASURE STR KTX-1-35-N
Produced of high durability ABS plastic for extended case life, these tape measures offer overmold for improved grip. Their ergonomic design fits comfortably in the hand and incorporate industry standard standout, and improved blade protection. belt clips.
Starrett 36" HEAVY TEMPERED STEEL RULERS STR C-404-R-36
The Starrett 36" Heavy Spring-Tempered Steel Rule with Inch Graduation features a satin chrome finish. Graduations at 8ths, 16ths, quick-reading 32nds, 64ths. 36", 4R Grad.
Starrett 39.5" X 1/4" 24-T BANDSAW BLADES STR K-60293
Starrett® K60293 Duratec™ FB Welded Saw Blade, 7 ft 9-1/2 in L, 1/4 in W Blade x 0.025 in THK Blade, 24 TPI, Carbon Steel Blade
Starrett 4" GRADUATED BLADE SQUARES STR 13-A
Starrett 13 squares are very popular with machinists, toolmakers, and patternmakers. The sliding blades are adjustable making it practical for a wide variety of uses. The faces of the head are ground square. 4" Satin Chrome Finish Graduated Blade.
Starrett 4" PRECISION COMBINATION SQUARES STR 11-H-4-4-R
The Starrett 4" Combination Square with Square Head features a reversible lock bolt, and hardened steel, photo-engraved blade with regular finish. This product also includes a cast iron head with black wrinkle finish. 4", 4R Grad, Regular Blade.
Starrett 4"-SPINDLE-STYLE SURFACE GAGES STR 56-A
Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work. 4" Spindle, 2" x 1 1/2" Base.
Starrett 4"END MEASURING ROD W/RUBBER HANDLE STR 234-A-4
Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 4" with Insulated Handle.
Starrett 5-PC CENTER PUNCH SETS STR S-117-PC
Starrett® S117PC Punch Set, Center Style, 1/16 to 5/32 in Punch, 5 Punches, 5 Pieces
Starrett 5-PC DRIVE PIN PUNCH SETS IN CASES STR S-248-PC
The Starrett 248 and B248 Drive Pin Punch includes a set of 5 punches (1 of each size) in plain box. One each 248A/B/C/D/E in Vinyl Case.
Starrett 5"END MEASURING ROD W/RUBBER HANDLE STR 234-A-5
Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 5" with Insulated Handle.
Starrett 5/16" PIN PUNCHES STR 248-D
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 8mm (5/16") Diameter.
Starrett 5/8"-3/4" BORE GAGE STR 78-XTZ-750
The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact points seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12" (1-300mm). 5/8-3/4" Range, w/3 Point Carbide Contact.
Starrett 50' STEEL LONG-LINE MEASURE TAPES STR 530-JT-50
The closed reel steel long tape features a classic vinyl clad steel case design with a rugged rewind mechanism for single user convenience and nylon rollers at case opening to reduce blade wear and for sustained field use. Blades are produced with high visibility, easy-to-read graduations, and a folding hook ring. One side in inch diameter (pi) measurements with 100th vernier scale and the other side is graduated in 1/8" and numbered in consecutive inches to each foot and repeat.
Starrett 50'-LENGTH CHALKLINE REELS/BOXES STR SCL-15
Starrett® Exact® branded chalk boxes are produced with high impact-resistant cases that hold 4 oz of chalk. The chalk box includes a 100\u0027 of line with a press to release feature. Each box is manufactured with 1:6 rewind ratio. The chalk line is secured with a stainless steel hook.
Starrett 6" 10/14-TPI REC/SAW BLADES--PK/5 STR B-6-10-14-5
Starrett® B61014-5 General Purpose Reciprocating Saw Blade, 6 in L, 10 to 14, Bi-Metal Body, Universal/Toothed Edge Tang
Recently Viewed
Appleton® ETP™ 8468A Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Steel
Appleton® ETP™ 8468A Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Steel
AGRICULTURAL BEARING-IBI206KRRB6 >
18-MM X 1.50 THREADED INSERTS--PK/6-THR418500 >
1/4" ALUMINUM STEEL MANDREL DOME HEAD POP RIVETS-RIVA/S812D >
ANGLE BEAMS-PNC46SB15C>
FB-6018 X 1-1/2 Dodge® 099118 Finished Bore Flexible Chain Coupling Flange With Setscrew, 60 Chain, 1-1/2 in Dia Bore, 18 Teeth, 5 in OD, 3-1/2 in Dia Hub, Steel
Dodge® 099118 Finished Bore Flexible Chain Coupling Flange With Setscrew, 60 Chain, 1-1/2 in Dia Bore, 18 Teeth, 5 in OD, 3-1/2 in Dia Hub, Steel
