Freudenberg Sealing Technologies
FREUDENBERG Simmering® 75042350 B1 Single Lip Oil Seal, 25 mm ID x 42.9 mm OD x 9.5 mm W, NBR Lip, 72 Durometer, Import, Transcom 40X80X7TC
FREUDENBERG Simmering® 40X80X7TC-BX B1 Single Lip Oil Seal, 25 mm ID x 42.9 mm OD x 9.5 mm W, NBR Lip, 72 Durometer, Import
FREUDENBERG Simmering® 75041724 B1SL Double Lip Oil Seal With Dust Lip, 75 mm ID x 95 mm OD, 10 mm W, NBR Lip, Transcom 29 X 38 X 4-TC
FREUDENBERG Simmering® 29X38X4TC-BX B1SL Double Lip Oil Seal With Dust Lip, 75 mm ID x 95 mm OD, 10 mm W, NBR Lip
FREUDENBERG Simmering® 75041523 B1SL Double Lip Oil Seal With Dust Lip, 45 mm ID x 80 mm OD, 13 mm W, NBR Lip, Import, Transcom 25X42X5-TC
FREUDENBERG Simmering® 25X42X5TC-BX B1SL Double Lip Oil Seal With Dust Lip, 45 mm ID x 80 mm OD, 13 mm W, NBR Lip, Import
FREUDENBERG Simmering® 75041418 B1 Oil Seal, 9 mm ID x 17 mm OD, 4.5 mm W, NBR Lip, 72 Durometer, Import, Transcom 24X52X7-TC
FREUDENBERG Simmering® 24X52X7TC-BX B1 Oil Seal, 9 mm ID x 17 mm OD, 4.5 mm W, NBR Lip, 72 Durometer, Import
FREUDENBERG Simmering® 75041138 BA Series Oil Seal, 6 mm ID x 22 mm OD, 7 mm W, FKM Lip, 75 Durometer, Import, Transcom 20 X 26 X 5-TC
Standard types according to DIN 3760, with outer elastomer sleeve, with and without additional dust lip (SL) to protect against light to medium levels of exterior soiling. Available in various designs and materials.
FREUDENBERG Simmering® 75040882 B1 Single Lip Oil Seal, 58 mm ID x 72 mm OD, 8 mm W, NBR Lip, 72 Durometer, Import, Transcom 17X35X5-TC
FREUDENBERG Simmering® 17X35X5TC-BX B1 Single Lip Oil Seal, 58 mm ID x 72 mm OD, 8 mm W, NBR Lip, 72 Durometer, Import
FREUDENBERG Simmering® 75040594 B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import, Transcom 15X28X5-SC
FREUDENBERG Simmering® 15X28X5SC-BX B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import
FREUDENBERG Simmering® 75022419 B1 Single Lip Oil Seal, 32 mm ID x 45 mm OD, 7 mm W, NBR Lip, 72 Durometer, Import, Transcom 45X72X7-TC
FREUDENBERG Simmering® 45X72X7TC-BX B1 Single Lip Oil Seal, 32 mm ID x 45 mm OD, 7 mm W, NBR Lip, 72 Durometer, Import
FREUDENBERG Simmering® 75021428 B1 Single Lip Oil Seal, 145 mm ID x 170 mm OD, 15 mm W, NBR Lip, 72 Durometer, Transcom 25X52X5-SC
FREUDENBERG Simmering® 25X52X5SC-BX B1 Single Lip Oil Seal, 145 mm ID x 170 mm OD, 15 mm W, NBR Lip, 72 Durometer
FREUDENBERG Simmering® 75020100 B1 Oil Seal, 36 mm ID x 50 mm OD, 7 mm W, NBR Lip, 72 Durometer, Import, Transcom 12 X 24 X 5-TC
FREUDENBERG Simmering® 12X24X5TC-BX B1 Oil Seal, 36 mm ID x 50 mm OD, 7 mm W, NBR Lip, 72 Durometer, Import
FREUDENBERG Simmering® 75019812 B1 Oil Seal, 135 mm ID x 160 mm OD, 15 mm W, NBR Lip, 72 Durometer, Import, Transcom 110X130X10-TC
FREUDENBERG Simmering® 110X130X10TC-BX B1 Oil Seal, 135 mm ID x 160 mm OD, 15 mm W, NBR Lip, 72 Durometer, Import
FREUDENBERG Simmering® 75018355 B1SL Double Lip Oil Seal With Dust Lip, 130 mm ID x 160 mm OD, 13 mm W, NBR Lip, Transcom 75 X 90 X 6-TC
FREUDENBERG Simmering® 75X90X6TC-BX B1SL Double Lip Oil Seal With Dust Lip, 130 mm ID x 160 mm OD, 13 mm W, NBR Lip
FREUDENBERG Simmering® 75017396 B1SL Double Lip Oil Seal With Dust Lip, 160 mm ID x 180 mm OD, 10 mm W, NBR Lip, Transcom 60X75X7-TC
FREUDENBERG Simmering® 60X75X7TC-BX B1SL Double Lip Oil Seal With Dust Lip, 160 mm ID x 180 mm OD, 10 mm W, NBR Lip
FREUDENBERG Simmering® 75015546 B1 Single Lip Oil Seal, 39 mm ID x 55.5 mm OD, 9 mm W, NBR Lip, 72 Durometer, Transcom 44X72X9-TC
FREUDENBERG Simmering® 44X72X9TC-BX B1 Single Lip Oil Seal, 39 mm ID x 55.5 mm OD, 9 mm W, NBR Lip, 72 Durometer
FREUDENBERG Simmering® 75013157 B1 Single Lip Oil Seal, 90 mm ID x 120 mm OD, 13 mm W, NBR Lip, 72 Durometer
FREUDENBERG Simmering® 333942TC-BX B1 Single Lip Oil Seal, 90 mm ID x 120 mm OD, 13 mm W, NBR Lip, 72 Durometer
FREUDENBERG Simmering® 75007316 B1 Single Lip Oil Seal, 95 mm ID x 120 mm OD, 12 mm W, NBR Lip, 72 Durometer, Transcom 17 X 40 X 7-TC
FREUDENBERG Simmering® 17X40X7TC-BX B1 Single Lip Oil Seal, 95 mm ID x 120 mm OD, 12 mm W, NBR Lip, 72 Durometer
FREUDENBERG Simmering® 75006635 B1 Single Lip Oil Seal, 36 mm ID x 52 mm OD, 7 mm W, NBR Lip, 72 Durometer, Transcom 170X210X15-TC
FREUDENBERG Simmering® 170X210X15TC-BX B1 Single Lip Oil Seal, 36 mm ID x 52 mm OD, 7 mm W, NBR Lip, 72 Durometer
FREUDENBERG Simmering® 75003654 B1 Oil Seal, 42 mm ID x 72 mm OD, 8 mm W, NBR Lip, 72 Durometer, Transcom 12X18X4.5-TC
FREUDENBERG Simmering® 12X18X4.5TC-BX B1 Oil Seal, 42 mm ID x 72 mm OD, 8 mm W, NBR Lip, 72 Durometer
FREUDENBERG Simmering® 230X260X15BAN BA Series Oil Seal, 230 mm ID x 260 mm OD, 15 mm W, NBR Lip, 72 Durometer, Import, Transcom 45X72X12-TC
Standard types according to DIN 3760, with outer elastomer sleeve, with and without additional dust lip (SL) to protect against light to medium levels of exterior soiling. Available in various designs and materials.
FREUDENBERG Simmering® 110X130X12B1N B1 Single Lip Oil Seal, 110 mm ID x 130 mm OD, 12 mm W, NBR Lip, 72 Durometer, Transcom 12 X 24 X 6-TC
FREUDENBERG Simmering® 110X130X12B1N B1 Single Lip Oil Seal, 110 mm ID x 130 mm OD, 12 mm W, NBR Lip, 72 Durometer
Dichtomatik V75141 O-Ring, 141 Dash Number, 2.3 in ID x 2.506 in OD, FKM, 75 Shore A Durometer, Import, Custom 141-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
Dichtomatik S70427 O-Ring, 427 Dash Number, 4.725 in ID x 5.275 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik S70351 O-Ring, 351 Dash Number, 4.725 in ID x 5.145 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Recently Viewed
AI Mode Conversation: GREY PNEUMATIC 3772DYou said: GREY PNEUMATIC 3772DThe Grey Pneumatic 3772D is a 3/4-inch drive x 2-1/4-inch-deep truck pinion locknut impact socket. It is explicitly engineered for professional heavy-duty servicing of transmission, differential, and end yoke locknuts on a wide variety of commercial trucks. Key Technical Specifications Drive Size: 3/4"Socket Size: 2-1/4" SAE (6-point hex configuration)Material: Premium heat-treated Chrome-Molybdenum (Cr-Mo) alloy steel for elite high-impact durability Wall Thickness: Extra-thin wall design to fit into highly restricted, recessed clearance areas Weight & Dimensions: Weighs 3.3 lbs with an overall length of 4.1 inches and a 3-inch bolt clearance depth
AI Mode Conversation: GREY PNEUMATIC 3764DYou said: GREY PNEUMATIC 3764DThe Grey Pneumatic 3764D is a 3/4-inch drive x 2-inch-deep truck pinion locknut impact socket. It is built from high-strength chrome-molybdenum alloy steel and features an extra-thin wall design specifically engineered to fit transmission, differential, and yoke locknuts on commercial trucks. Key Specifications & Pricing Drive Size: 3/4" square drive Socket Size: 2" (6-point hex) Wall Profile: Extra-thin wall (Note: Due to the thin wall, you should never use reducing adapters with larger 1" drive impact tools). Weight: 2.61 lbs Warranty: Backed by Grey Pneumatic's Lifetime Warranty. Retail Price: Usually ranges from $76.00 to $92.00 depending on the retailer.
The Grey Pneumatic 3768D is a professional-grade 3/4-inch drive x 2-1/8-inch deep-length truck pinion locknut impact socket. It is specifically engineered to remove and install transmission and differential end yoke locknuts on a wide variety of trucks. Key Technical Specifications Drive Size: 3/4 inch Socket Size (Hex): 2-1/8 inches Socket Type: 6-Point deep impact socket with an extra-thin wall design Material: High-strength Chrome Molybdenum (Cr-Mo) alloy steel for maximum durability Dimensions: 4.12 inches overall length, with a 3.00-inch bolt clearance depth and a 1.02-inch hex depth Weight: 2.9 lbs
The Grey Pneumatic 3780D is a 3/4-inch drive by 2-1/2-inch deep-length 6-point impact socket specifically designed for removing and installing transmission, differential, and yoke pinion locknuts on a wide variety of trucks. Key Technical Specifications Drive Size: 3/4"Socket Size: 2-1/2" (SAE 6-point) Material: High-grade Chrome-Molybdenum (Cr-Mo) alloy steel Dimensions: Drive end width of 2.87", socket end width of 3.27", and a total length of 4.1"Weight: 3.75 to 3.8 lbs
Poly bag with barcode
Lifetime Warranty
Well-thought-out design for ease of use
Made with attention to every detail for excellent results
Lightweight and durable construction for heavy use
Subject to numerous quality tests to eliminate any manufacturing defects
Product Details
3/4" Drive 1" 8-Point Standard Impact Socket (3532S) by Grey Pneumatic®. Made from the highest-grade material utilizing state-of-the-art manufacturing processes and equipment, this product will help you handle all your tasks easier and quicker. It delivers the perfect balance of strength and stiffness required for any of your high impact jobs.
Impact Socket
Type High Torque, 8-Point, Standard Length, SAE Fractional, Shape III
Drive End Size 3/4 Inch
Socket End Size 1-1/4 Inch
Outside Diameter 2.4 Inch
Overall Length 2.2 Inch
Material Chrome-Molybdenum Alloy Steel
Bolt Clearance Depth 1.22 Inch
Socket Depth 0.87 Inch
Application Automotive, Industrial, Assembly, Mining, Maintenance, Construction and Energy Industry
Packaging Type Poly Bag with Barcode
Features
All GP Impact Sockets feature the GP High Torque Drive
Increased Strength - Transfers the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength
Increased Torque - Allows up to 20 Percent more torque to be applied than on standard hex impact sockets
Easier Access to Tight Areas - The shift in pressure allows us to reduce the socket wall thickness, increasing access to tight areas
Reduced Wear - Our impact sockets grip the fastener across a broader contact area, reducing the chance of rounding off fasteners
All GP Sockets feature extra-large size markings for quick identification
Grey Pneumatic ImpactSockets are designed for professional tool users.
They are engineeredspecifically for use with impact tools, using the most up to dateindustrial specifications.
Grey Pneumatic ImpactSockets are made from high quality alloy steel (chrome-molybdenum).
Grey Pneumatic ImpactSockets are tested to the highest specifications to deliver outstandingperformance.
Poly bag with barcode
Lifetime Warranty
