Dichtomatik V4.00X048 O-Ring, 48 mm ID x 56 mm OD, FKM, 80 Shore A Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
-
BrandDichtomatik
-
Manufacturer Part NumberV4.00X048
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialFKM
-
ColorBlack
-
Inside Diameter48 mm
-
Domestic/ImportImport
-
Durometer80 Shore A
-
Outside Diameter56 mm
- Good chemical resistance to mineral oils and greases, synthetic oils and greases, motor, transmission and ATF oils up to 150 deg C
- Very good weathering, ozone and aging resistance
- Very low gas permeability
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|ISD Certified|NFPA Listed|PTDA Certified
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
2" -FEMALE PIPE THREAD STEEL BLACK COUPLING-JPW2BSC >
.015" X 12" FEELER GAUGE STRIPS-OHSFS015 >
FYHĀ® NA311 35 NA Series Cylindrical Pillow Block Unit, 2-3/16 in Dia Bore, 2.87 in W, 71.6 kN Dynamic/45 kN Static Load
FYHĀ® NA311 35 NA Series Cylindrical Pillow Block Unit, 2-3/16 in Dia Bore, 2.87 in W, 71.6 kN Dynamic/45 kN Static Load
ISOSTATICā¢ OilubeĀ® 401167 Round Bore Sleeve Bearing, 9/16 in Dia Bore, 11/16 in OD, 1 in W
ISOSTATICā¢ OilubeĀ® 401167 Round Bore Sleeve Bearing, 9/16 in Dia Bore, 11/16 in OD, 1 in W
EMPIREĀ® 6936 Power Tape, 30 ft L x 1 in W Blade, Carbon Steel with Acrylic Coated, Imperial
EMPIREĀ® 6936 Power Tape, 30 ft L x 1 in W Blade, Carbon Steel with Acrylic Coated, Imperial
