Dichtomatik 75182217 Extruded O-Ring Cord, 1/4 in Dia, 70 Shore A Durometer, Nitrile, Black, Domestic
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
-
BrandDichtomatik
-
Manufacturer Part Number75182217
-
CountryUSA
-
Temperature Rating-30 to 100 deg C
-
MaterialNitrile
-
ColorBlack
-
Diameter1/4 in
-
Domestic/ImportDomestic
-
Durometer70 Shore A
- Good chemical resistance to mineral oils and greases
- HFC up to about 50 deg C and water up to a maximum of 80 deg C
-
UNSPSC31401503
-
Alternative Part NumberCRD 250 NC70R
-
Catalog
Recently Viewed
Dichtomatik 75182217 Extruded O-Ring Cord, 1/4 in Dia, 70 Shore A Durometer, Nitrile, Black, Domestic
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
Gates® Power Transmission 2836V380 Banded Multi-Speed V-Belt, 1-3/4 in W Top, 36 deg Groove, 38.8 in L Outside, Rubber
Power transmission systems do more than operate at constant speeds with constant outputs. Customers increasingly need variable speed systems to regulate the speed and rotational force, or output torque, of critical mechanical equipment. Our Multi-Speed belts are engineered for efficiency, energy savings and increased productivity at a wide range of speeds and speed ratios.
3/8" /1/2" T-HANDLE DRILL CHUCK KEY-JWH345291 >
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
ILSCO® SafetySub® USPA-350SS-DB Type USPA-SS Dual Rated In-Line Waterproof Splice, 10 AWG to 350 kcmil Aluminum/Copper Conductor, Aluminum
ILSCO® SafetySub® USPA-350SS-DB Type USPA-SS Dual Rated In-Line Waterproof Splice, 10 AWG to 350 kcmil Aluminum/Copper Conductor, Aluminum
Gates® Power Transmission 2530V530 Banded Multi-Speed V-Belt, 1-9/16 in W Top, 30 deg Groove, 54 in L Outside, Rubber
Power transmission systems do more than operate at constant speeds with constant outputs. Customers increasingly need variable speed systems to regulate the speed and rotational force, or output torque, of critical mechanical equipment. Our Multi-Speed belts are engineered for efficiency, energy savings and increased productivity at a wide range of speeds and speed ratios.
