Dichtomatik 75183027 Extruded O-Ring Cord, 0.313 in Dia, 75 Shore A Durometer, FKM, Black, Domestic
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
-
BrandDichtomatik
-
Manufacturer Part Number75183027
-
CountryUSA
-
Temperature Rating-15 to 200 deg C
-
MaterialFKM
-
ColorBlack
-
Diameter0.313 in
-
Domestic/ImportDomestic
-
Durometer75 Shore A
- Good chemical resistance to mineral oils and greases, synthetic oils and greases, motor, transmission and ATF oils up to 150 deg C, fuels, HFD flame resistant pressure fluids, aliphatic, aromatic and chlorinated hydrocarbons, water to a maximum of 80 deg C
- Very good weathering, ozone and aging resistance
- Very low gas permeability
-
UNSPSC31401503
-
Alternative Part NumberCRD 313 VC575
-
Catalog
Recently Viewed
Dichtomatik 75183027 Extruded O-Ring Cord, 0.313 in Dia, 75 Shore A Durometer, FKM, Black, Domestic
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
#24 4-PLY COTTON BLEND MOP HEAD - DQB12693 >
Dodge® 050386 211 Normal Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 4 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 5-1/2 in OAL x 4.63 in OAH
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
3/4" X 21' T&C IMPORT BLACK PIPE-JWH437018 >
Porter-Cable® FN16125 Straight Finish Nail, 1-1/4 in L, 16 ga, Bright, Steel
Browning® 767964 VPLE 200 Normal Duty Low Base Pillow Block Ball Bearing Unit, 2 in Dia Bore, 6-9/16 to 7-5/16 in L Bolt Center-to-Center, 2-7/16 in Base to Bore Centerline, 8-13/16 in OAL x 4-29/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
