Drillco 77A132C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
-
BrandDrillco
-
UPC045997392196
-
Manufacturer Part Number77A132C
-
CountryUSA|Canada
-
FinishUncoated
-
MaterialSolid Carbide
-
TypeCenter Cutting Imperial Regular Length Single End
-
Series7700
-
Cutter Diameter1/2 in
-
Shank Diameter1/2 in
-
Number of Flutes4
-
Shank TypeRound
-
Length of Cut1 in
-
Overall Length3 in
- Solid carbide construction for extreme rigidity and strength
- Ball nose for profiling and grooving with radii, and contouring
- 4 flutes produce a better surface finish and less chatter
- Bright finish for added lubricity
-
UNSPSC27112803
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including Cobalt, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
-
SDS
-
Catalog
Recently Viewed
Drillco 77A132C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Legris by Dixon® 1094U56R00 Tubing, 0.16 in ID x 1/4 in OD x 100 ft L x 0.045 in THK Wall, Polyurethane, Domestic
Legris by Dixon® 1094U56R00 Tubing, 0.16 in ID x 1/4 in OD x 100 ft L x 0.045 in THK Wall, Polyurethane, Domestic
HCI Preferred Supplier 80512 Pressure Gauge, 0 to 30 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial
HCI Preferred Supplier 80512 Pressure Gauge, 0 to 30 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial
Crescent® 02228B Round Chain Saw File, 8 in L, Double/Smooth Cut
Drillco 76A112C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
