Ball End Mills
Drillco 76A108C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 76A112C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 76A116C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 76A120C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 5/16 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 76A124C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 3/8 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 76A128C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 76A132C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 77A108C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 77A112C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 77A116C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 77A120C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 5/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 77A124C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 3/8 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 77A128C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Drillco 77A132C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
MORSE® 91160 5942T Ball Nose Center Cutting Regular Length Single End End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, TiALN Coated
MORSE® 52782 5913 Ball Nose Center Cutting Regular Length Single End End Mill, 0.032 in Dia Cutter, 0.096 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
MORSE® 44281 4554 Ball Nose Center Cutting Regular Length Single End End Mill, 1 in Dia Cutter, 2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4-1/2 in OAL, Bright
MORSE® 43188 1890 Ball Nose Center Cutting Regular Length End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
MORSE® 58204 5942 Ball Nose Center Cutting Regular Length Single End End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
MORSE® 43167 1889 Ball Nose Double End Regular Length End Mill, 1/2 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-3/4 in OAL, Bright
MORSE® 58332 5948 Ball Nose Center Cutting Double End Stub Length End Mill, 1/2 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
MORSE® 43117 1887 Ball Nose Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
MORSE® 58132 5940 Ball Nose Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
MORSE® 58862 5957 Ball Nose Center Cutting Long Length Single End End Mill, 1/2 in Dia Cutter, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Bright
Recently Viewed
MAGLITE® LR00001 Water Resistant Replacement Lamp, Halogen Bulb, 643 High Lumens/148 Low Lumens/66 Eco Lumens Lumens
MAGLITE® LR00001 Water Resistant Replacement Lamp, Halogen Bulb, 643 High Lumens/148 Low Lumens/66 Eco Lumens Lumens
7/16" X 3-1/2" USS S/H CAPSCREWS-HOL72214>
SERVICE CARTS-PNC33000>
3/8"-24 X 3" SAE S/H CAPSCREWS-HOL73120>
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
5/8" X 6" USS S/H CAPSCREWS-HOL72294>
