Browning 2-1/2"-ID QD SF-STYLE BUSHINGS BRW SF-2-1/2
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandBrowning®
-
UPC662289395309
-
Manufacturer Part Number1077445
-
CountryUSA
-
MaterialDuctile Iron
-
Flange Diameter4-5/8 in
-
Flange Thickness9/16 in
-
Torque Rating11000 in-lb
-
TypeStandard
-
Screw Size3/8-16 x 2 in
-
Number of Bolt Holes3
-
Barrel Diameter3-1/8 in
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter3-7/8 in
-
Bore Diameter2-1/2 in
-
Overall Length1.995 in
-
Suitable For Use WithBrowning® Sheaves, Sprockets and Pulleys
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face
- Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171516
-
Alternative Part NumberSF 2 1/2
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Dodge® 066230 215 Special Duty Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 11 to 12-1/2 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 14-1/4 in OAL x 9.88 in OAH
Dodge® 066230 215 Special Duty Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 11 to 12-1/2 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 14-1/4 in OAL x 9.88 in OAH
15 TOOTH SPROCKETS FOR #60 CHAIN
Leviton® 13357 Lampholder, 660 W Lamp, 600 VAC, Medium Bi-Pin Fluorescent Lamp
Drillco 77A132C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
Legris by Dixon® 1094U56R00 Tubing, 0.16 in ID x 1/4 in OD x 100 ft L x 0.045 in THK Wall, Polyurethane, Domestic
Legris by Dixon® 1094U56R00 Tubing, 0.16 in ID x 1/4 in OD x 100 ft L x 0.045 in THK Wall, Polyurethane, Domestic
