Conduit Connectors
Steel CityĀ® TO221-1 Offset Set Screw Cable Connector, 1/2 in Trade, For Use With EMT Conduit, Die Cast Zinc
Steel CityĀ® TO221-1 Offset Set Screw Cable Connector, 1/2 in Trade, For Use With EMT Conduit, Die Cast Zinc
Steel CityĀ® TC912-SC-1 Compression Conduit Connector, 3/4 in Trade, For Use With EMT Conduit, Die Cast Zinc
Steel CityĀ® TC912-SC-1 Compression Conduit Connector, 3/4 in Trade, For Use With EMT Conduit, Die Cast Zinc
RACOĀ® 2646 Non-Insulated Set Screw Conduit Connector, 4 in Trade, 4-5/32 in Cable Openings, For Use With EMT Conduit, Die Cast Zinc
RACOĀ® 2646 Non-Insulated Set Screw Conduit Connector, 4 in Trade, 4-5/32 in Cable Openings, For Use With EMT Conduit, Die Cast Zinc
AppletonĀ® NEERā¢ AC95 Non-Insulated Conduit Connector With Locknut, 1/2 in Trade, For Use With Armored/FMC/Metal Clad Cable, Die Cast Zinc, Natural/Zinc Plated
AppletonĀ® offer NEERā¢ zinc cable and conduit connectors for terminating flexible metal conduit in a dry location box or enclosure, or joining lengths of flexible metal conduit. Type SC straight squeeze connectors, Type AC 90 deg two screw clamp connectors and Type DC-5500 duplex, single screw, clamp connectors are used to make a termination of flexible metal conduit. Type FC set screw connectors are used to terminate 1/2 in regular wall steel or aluminum flexible conduit. Type GC screw-in connectors are for use with flexible metal conduit. Type GX screw-in connectors are used to join lengths of flexible metal conduit.
AppletonĀ® ETPā¢ 7250S 7000S Non-Insulated Throat Straight Compression Connector, 2-1/2 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 7000S Series steel EMT compression connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 7000S Series have a male NPS threaded hub and are available with or without an insulated throat.
AppletonĀ® ETPā¢ 4150S 4000S Non-Insulated Straight Set Screw Connector, 1-1/2 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
AppletonĀ® ETPā¢ 4125S 4000S Non-Insulated Straight Set Screw Connector, 1-1/4 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
AppletonĀ® ETPā¢ 4075S 4000S Non-Insulated Straight Set Screw Connector, 3/4 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
AppletonĀ® ETPā¢ 4050S 4000S Non-Insulated Straight Set Screw Connector, 1/2 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
Recently Viewed
22-1/2" COBRA WATER PUMP PLIERS - KNI8701560 >
NAVY WELDING JACKET-RIIFN930CXXXL>
1-1/4-FPT X 1-1/4FPX 45-DEG-DAY582020>
E-Frame Breaker are Lighting Panelboard Circuit breakers that are proven effective and reliable which provide a wide variety or robust features that are use specifically in Square D NF Panelboards. This range of breaker is ideally designed to offer superior overload and short circuit protection. All E-Frame breakers have a thermal-magnetic trip unit as well as signal indicator that will indicate when a trip has occur. Mounting bolts are used to hold these breakers in place. This E-Frame breaker is 20A, 1 pole, and has an operating voltage of 277 VAC. It also provides a 25 kA max interrupt rating at 120 VAC. This device has a hold current of 270A which is the maximum current the breaker can be held to ensure it will trip and a trip current of 875A which is the current value when the breaker is guaranteed to trip. Many accessories are available for this breaker. This breaker was calibrated for 40 degrees C. This product is UL Listed as Switching duty and High Intensity Discharge. HACR rated.
FILTERS
BBI 693170 TeksĀ® Fully Threaded Self-Drilling Screw, #12-14, 3/4 in OAL, Indented Hex/Washer Head, Unslotted Drive, Low Carbon Steel, Zinc CR+3, Drill Point
BBI 693170 TeksĀ® Fully Threaded Self-Drilling Screw, #12-14, 3/4 in OAL, Indented Hex/Washer Head, Unslotted Drive, Low Carbon Steel, Zinc CR+3, Drill Point
