Martin Accu-Torch® SPP-29 Scratched Shear Pin, For Use With Bolt-On Shear Pin Sprocket, Steel
Shear pin sprockets provide simple, dependable protection against expensive machinery damage caused by overloads or jamming. Torque is transmitted by a single pin, necked to shear when the safe load is exceeded. When an overload occurs the pin shears, disconnecting the drive immediately. Shear pins can be necked to customer specific torque ratings.
-
BrandMartin
-
UPC697950077307
-
Manufacturer Part NumberSPP-29
-
CountryUSA|Canada
-
MaterialSteel
-
Suitable For Use WithBolt-On Shear Pin Sprocket
- Torque is transmitted by a single pin, necked to shear when the safe load is exceeded
-
UNSPSC27113100
-
WarrantyLimited
Recently Viewed
Martin Accu-Torch® SPP-29 Scratched Shear Pin, For Use With Bolt-On Shear Pin Sprocket, Steel
Shear pin sprockets provide simple, dependable protection against expensive machinery damage caused by overloads or jamming. Torque is transmitted by a single pin, necked to shear when the safe load is exceeded. When an overload occurs the pin shears, disconnecting the drive immediately. Shear pins can be necked to customer specific torque ratings.
Martin 100E25 QD Bushed Type B1 Single Pitch Roller Chain Sprocket, 10.645 in OD, #100 Chain, 25 Teeth, 1-1/4 in Pitch, Steel
QD (quick detachable)is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.
Martin 41A54 Stock Bore Type A Single Pitch Roller Chain Sprocket, 23/32 in Dia Bore, 8.885 in OD, #41 Chain, 54 Teeth, 1/2 in Pitch, Steel
A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
Browning® Gearbelt® 1054642 Type 1 Synchronous Timing Pulley With Flange, 1/2 in Finished Bore, 1.88 in OD, 16 Grooves, 1.91 in Dia Pitch, 1 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Martin 60BS14 1 1/4 Bored-to-Size Type BS Single Pitch Roller Chain Sprocket With Keyway, 1-1/4 in Dia Bore, 3.736 in OD, #60 Chain, 14 Teeth, 3/4 in Pitch, Steel
These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.
Martin 35A72 Stock Bore Type A Single Pitch Roller Chain Sprocket, 23/32 in Dia Bore, 8.814 in OD, #35 Chain, 72 Teeth, 3/8 in Pitch, Steel
A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
