Shear Pins
Browning® 1305002 Stock Shear Pin, 3/16 in Dia Neck, 1-1/8 in OD, For Use With Model SHH1 Hub, 3730 in-lb Torque, Steel
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered.
Browning® 1305051 Stock Shear Pin, 7/32 in Dia Neck, 1-7/16 in OD, For Use With Model SHP1 Hub, 7330 in-lb Torque, Steel
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered.
Browning® 1305168 Stock Shear Pin, 13/32 in Dia Neck, 2-7/16 in (SHQ1)/2-5/8 in (SHR1) OD, For Use With Model SHQ1/SHR1 Hub, 33530 in-lb Torque, Steel
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered.
Shear pin sprockets provide simple, dependable protection against expensive machinery damage caused by overloads or jamming. Torque is transmitted by a single pin, necked to shear when the safe load is exceeded. When an overload occurs the pin shears, disconnecting the drive immediately. Shear pins can be necked to customer specific torque ratings.
Recently Viewed
16-OZ STEEL-HANDLED CLAW HAMMER-STA51031 >
THE ARC ABRASIVES ROLL IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: STOCK REMOVAL, DEBURRING, FLASH REMOVAL, SURFACE PREPARATION, AND FINISHING. PERFECT FOR USE ON ALUMINUM AND VARIOUS METALS.
ARC73154 >
CAULKING GUNS-HYD46482>
BLACK TRUCKS-RBM4616BLA>
Ingersoll Rand HH1-1194 Lock Spring Replacement Part, For Use With Ingersoll Rand A and W Series Chipping Hammer
Ingersoll Rand HH1-1194 Lock Spring Replacement Part, For Use With Ingersoll Rand A and W Series Chipping Hammer
150/200 MH/PS CAPACITORS
