Single Pitch Roller Chain Sprockets
PTI 10B-31B Single Strand Hub Type B Roller Chain Sprocket, 20 mm Dia Bore, 163.9 mm OD, #10B-1 Chain, 31 Teeth, 15.875 mm Pitch, C45 Steel
Hub type metric sprockets are available with a minimum plain bore (pilot bore) and some stock finished bore sizes. Any shaft size is possible with our custom bore and keyway capability. Sprockets with hubs are typically fitted to the shaft as a clearance fit. They are held in place with two set screws and a keyway. Clearance fits are popular for light loads and slow speeds. A press fit (or shrink fit to the shaft) is usually preferred for higher speeds or heavier loads as they fit to the shaft more securely than a clearance fit sprocket. Depending on the clearance of the shaft fit, sprockets may work slightly on the shaft causing possible fretting or shaft wear. All sprockets are available with hardened teeth from stock or on request. Press fits usually require the sprocket to be heated for installation to expand the bore. As a heated sprocket cools, it shrinks, conforming to the shaft with a tight grip. A set screw can be used to secure the key. The TL taper bushed sprocket will function like the press fit sprocket and is generally easier to install.
Martin SPROCKETS--USE "BRW" H-50-JA-13
QD (quick detachable)is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.
Martin 72-TOOTH #35-1 CHAIN SPROCKETS MAT 35-A-72
A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
Martin 60-TOOTH J-BUS #140 CHAIN SPROCKET MAI 140-J-60
QD (quick detachable)is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.
Martin 60-TOOTH #35-1 CHAIN SPROCKETS MAT 35-A-60
A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
Martin 60-T DRIVE SPROCKETS FOR #41 CHAIN MAT 41-A-60
A Plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
Martin 54-T DRIVE SPROCKETS FOR #41 CHAIN MAT 41-A-54
A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
Martin 40-TOOTH #35-1 CHAIN SPROCKETS MAT 35-A-40
A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
Martin 16-TOOTH SPROCKETS FOR #40 CHAIN MAI 40-BS-16-F-5/8
These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.
Martin 14-TOOTH #60-1 CHAIN SPROCKETS MAI 60-BS-14-F1-1/4
These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.
Martin 12-T SPROCKETS FOR #40 CHAIN MAI 40-BS-12-F-1
These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.
Martin 100E25 QD Bushed Type B1 Single Pitch Roller Chain Sprocket, 10.645 in OD, #100 Chain, 25 Teeth, 1-1/4 in Pitch, Steel
QD (quick detachable)is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.
Martin #120-1 CHAIN 80-TOOTH SPROCKETS MAI 120-J-80
QD (quick detachable)is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.
Linn Gear STAINLESS STEEL SPROCKET LIN 50-B-18-SS
Linn 50B18SS Type B Single Strand Machine Cut Roller Chain Sprocket, 0.625 to 1.937 in Dia Bore, 3.919 in OD, #50 Chain, 18 Teeth, 5/8 in Pitch, Stainless Steel
Linn Gear 36-TOOTH TL #80-1 CHAIN SPROCKETS LIN 80-TL-B-36
Linn 80TLB36 Type B Single Strand Roller Chain Sprocket, 1/2 to 2-1/2 in Dia Bore, 12.03 in OD, #80 Chain, 36 Teeth, 1 in Pitch, Steel
Linn Gear 26-TOOTH MPB 40-CHAIN SPROCKETS LIN 40-A-26
Linn 40A26 Type A Single Strand Machine Cut Stock Bore Roller Chain Sprocket, 5/8 in Dia Bore, 4.42 in OD, #40 Chain, 26 Teeth, 1/2 in Pitch, Steel
IDC Select 22-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-22-F-1-7/16
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
IDC Select 19-TOOTH #50 CHAIN SPROCKETS IDC 50-B-19-F-3/4
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
IDC Select 18-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-18-F-1-3/16
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
IDC Select 16-TOOTH TL #50-1 CHAIN SPROCKETS IDC 50-B-TL-16
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
IDC Select 16-TOOTH #80-1 CHAIN SPROCKETS IDC 80-B-16-F-1-1/2
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
IDC Select 15-TOOTH #80-1 CHAIN SPROCKETS IDC 80-B-15-F-2
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
IDC Select 15-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-15-F-1-3/4
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
IDC Select 13-TOOTH #80-1 CHAIN SPROCKETS IDC H-80-B-13-F-1-1/2
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
Recently Viewed
1-3/8" PREMIUM DIAMOND CORE BIT-DIM05404>
The Grey Pneumatic 1/2" Drive x 5/8" Deep Universal Socket (2020UD) is a versatile and reliable tool for a variety of applications. Its universal design and deep well make it ideal for reaching recessed bolts and working with different fastener shapes and sizes.
KEY FEATURES AND BENEFITS:
Universal Design: Fits a wide range of fastener shapes and sizes.
Deep Well: Provides easy access to recessed bolts.
Impact Rated: Designed to withstand the high torque and impact forces generated by impact drivers.
Durable Construction: Made from high-quality materials for long-lasting performance.
Versatile Applications: Suitable for automotive, industrial, and home projects.
SPECIFICATIONS:
Drive: 1/2 inch
Socket Size: 5/8 inch
Depth: Deep
Type: Universal
Point: 6 point
Impact Rated: Yes
3/4" Drive x 2-1/8" Standard - 12 Point | Poly Bag with Barcode | Weight: 2.82 lbs. | Lifetime Warranty
The Grey Pneumatic 1" Drive x 13/16" Deep Socket (4026D) is a high-performance tool designed for demanding applications. Crafted from premium alloy steel, this socket offers exceptional durability and strength. Its deep socket design and high-torque drive make it ideal for use with impact tools, providing reliable performance for automotive repair, industrial maintenance, and other heavy-duty tasks.
KEY FEATURES AND BENEFITS:
Durable Construction: Crafted from high-quality alloy steel for long-lasting performance.
Impact Resistant: Designed to withstand the force of impact tools.
Deep Socket Design: Ideal for reaching deep into recessed areas.
High-Torque Drive: Reduces wear on fasteners and sockets, while improving strength and torque transfer.
Professional-Grade: Built to meet the demands of demanding professionals.
SPECIFICATIONS:
Drive Size: 1 inch
Socket Size: 13/16 inch
Material: Alloy Steel
Finish: Black Oxide
Weight: Approximately 3 pounds
Dimensions: 6 x 5 x 5 inches
1-1/2" Drive x 4" Standard | Poly Bag with Barcode | Weight: 14.53 lbs.
1" PREMIUM BLACK DIAMOND CORE BITS-DIM05286>
