Idler Roller Chain Sprockets
Browning #25 ROLLER CHAIN IDLER SPROCKETS BRW HN-25-B-19-IDLER
Browning® 1297225 Idler Sprocket With Hardened Teeth, 1-1/2 in Dia Bore, 1.65 in OD, 25 Chain, 19 Teeth, 1/4 in Pitch, Steel
Browning #35 ROLLER CHAIN IDLER SPROCKETS BRW HN-35-B-13-IDLER
Browning® 1297233 Single Strand Idler Sprocket With Hardened Teeth, 1/2 in Dia Bore, 1-3/4 in OD, 35 Chain, 13 Teeth, 3/8 in Pitch, Steel
Browning #35 ROLLER CHAIN IDLER SPROCKETS BRW HN-35-B-19-IDLER
Browning® 1297241 Single Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 2.47 in OD, 35 Chain, 19 Teeth, 3/8 in Pitch, Steel
Browning #40 CHAIN DOUBLE IDLER SPROCKETS BRW HND-40-B-19-IDLER
Browning® 1297373 Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.28 in OD, 40-2 Chain, 19 Teeth, 1/2 in Pitch, Steel
Browning #40 ROLLER CHAIN IDLER SPROCKETS BRW HN-40-B-19-IDLER
Browning® 1297266 Single Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.28 in OD, 41 Chain, 19 Teeth, 1/2 in Pitch, Steel
Browning #50 CHAIN DOUBLE IDLER SPROCKETS BRW HND-50-B-17-IDLER
Browning® 1297381 Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.72 in OD, 50-2 Chain, 17 Teeth, 5/8 in Pitch, Steel
Browning #50 ROLLER CHAIN IDLER SPROCKETS BRW HN-50-B-17-IDLER
Browning® 1297274 Single Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.72 in OD, 50 Chain, 17 Teeth, 5/8 in Pitch, Steel
Browning #60 CHAIN DOUBLE IDLER SPROCKETS BRW HND-60-B-17-IDLER
Browning® 1297399 Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 4.46 in OD, 60-2 Chain, 17 Teeth, 3/4 in Pitch, Steel
Browning #60 ROLLER CHAIN IDLER SPROCKETS BRW HN-60-B-17-IDLER
Browning® 1297282 Single Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 4.46 in OD, 60 Chain, 17 Teeth, 3/4 in Pitch, Steel
Browning #80 CHAIN DOUBLE IDLER SPROCKETS BRW HND-80-B-13-IDLER
Browning® 1297407 Double Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 4.66 in OD, 80-2 Chain, 13 Teeth, 1 in Pitch, Steel
Browning #80 ROLLER CHAIN IDLER SPROCKETS BRW HN-80-B-13-IDLER
Browning® 1297290 Single Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 4.66 in OD, 80 Chain, 13 Teeth, 1 in Pitch, Steel
Browning 12-TOOTH #80 CHAIN IDLER SPROCKETS BRW HB-80-A-12 X 3/4
Browning® 1297472 Single Strand Idler Sprocket With Hardened Teeth, 3/4 in Dia Bore, 4.33 in OD, 80 Chain, 12 Teeth, 1 in Pitch, Steel
Browning 17-TOOTH #40-CHAIN IDLER SPROCKETS BRW HB-40-A-17 X 5/8
Browning® 1297449 Single Strand Idler Sprocket With Hardened Teeth, 5/8 in Dia Bore, 2.96 in OD, 40 Chain, 17 Teeth, 1/2 in Pitch, Steel
Browning® 1297464 Idler Sprocket, 0.635 in Dia Bore, 3.49 in OD, 60 Chain, 13 Teeth, 3/4 in Pitch, Steel
Browning® 1297464 Idler Sprocket, 0.635 in Dia Bore, 3.49 in OD, 60 Chain, 13 Teeth, 3/4 in Pitch, Steel
Martin 40BB17H 5/8 BB-H Ball Bearing Type A Idler Roller Chain Sprocket, 5/8 in Dia Bore, 2.97 in OD, 40 Chain, 17 Teeth, 1/2 in Pitch, Steel
Martin idlers are smooth-running and available in oil-impregnated, sintered bronze, extra-duty bearing press-fitted in sprocket and a hardened steel journal case for maximum resistance to wear. Steel sprockets used in Martin idlers are accurately machined (not stamped) the same as sprockets normally supplied for power transmission use. Martin can also alter existing sprockets and install bearings to make custom idlers.
Recently Viewed
Keep all your pouches and holders together with this general-purpose tool belt. Designed to carry tunnel-loop and slotted tool pouches and holders. Buckle can be adjusted and released with one hand.
Armstrong brand wrenches feature precise geometry for an exacting fit and are designed to withstand the toughest conditions from factory floors to the U.S. Military.
Features:
Hardened for extra strength
Withstands stress under impact
Prevents rounding of fasteners' corners
"Lobular" design exerts force on flats of fasteners
Chamfered opening slips easily over fasteners and holds securely
Specifications:
No. of Points: 12
Opening: 1-15/16"
Weight: 5.72 lb
Overall Length: 13.250"
Head Thickness: 1.250"
Offset Height: 1.7875"
Head Diameter: 3.125"
Handle Width: 1.937"
Handle Height: 1.500"
Handle Length: 3.687"
This tool is a heavy-duty, single-ended box wrench featuring an anvil or striking face at the opposite end. It is engineered to be struck with a hammer to tighten high-torque fasteners or loosen "frozen" or rusted nuts in severe industrial environments. Opening Size: 1-1/2 inches Point Profile: 12-pointPattern Style: Straight handle Design Features: Built with a "lobular" opening configuration that drives force against the flat surfaces of the fastener instead of the corners, effectively preventing rounding.
3 DRAWER INTERMEDIATE HD TOOLCHEST-ARS16622>
2-5/16 12-PT STRIKING WRENCH-ARS33074>
1-3/4 STRAIGHT SLUGGER WRENCH-ARS33356>
