Browning® 1297274 Single Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.72 in OD, 50 Chain, 17 Teeth, 5/8 in Pitch, Steel
Browning® 1297274 Single Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.72 in OD, 50 Chain, 17 Teeth, 5/8 in Pitch, Steel
-
BrandBrowning®
-
UPC662289104482
-
Manufacturer Part Number1297274
-
CountryUSA
-
Pitch5/8 in
-
MaterialSteel
-
Chain Size50
-
TypeSingle Strand
-
Hub Diameter2-5/8 in
-
Number of Teeth17
-
Keyway Size1/4 x 1/8 in
-
Outside Diameter3.72 in
-
Length Through Bore1 in
-
Bore Diameter1 in
- For use with drive tighteners
- Cast iron
- All Browning stock idlers furnished with needle bearings have retainers that insure minimum internal friction and wear by separating the needle rollers
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Replacement bearings are readily available at 1 set per pack
- Cast iron
- All Browning stock idlers furnished with needle bearings have retainers that insure minimum internal friction and wear by separating the needle rollers
-
Alternative Part NumberHN50B17 IDLER
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
Recently Viewed
Browning® 1297274 Single Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.72 in OD, 50 Chain, 17 Teeth, 5/8 in Pitch, Steel
Browning® 1297274 Single Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.72 in OD, 50 Chain, 17 Teeth, 5/8 in Pitch, Steel
Dodge® 101468 Hardened Teeth Type ATL Roller Chain Sprocket, 2-11/16 in Dia Bore, 5.95 in OD, 80 Chain, 17 Teeth, Low-Carbon Steel
Ideal for low-speed power transmission applications. Roller chain drives have the ability to handle high shock loads and deliver dependable performance make them the drive of choice for many applications. Dodge® Taper-Lock® sprockets require no expensive or time-consuming re-matching. Their taper-bushing mount automatically compensates for variations in shaft and sprocket machining tolerances. With Dodge® Taper-Lock® sprockets, there are no protruding flanges or screw-heads to take up valuable shaft space. Their compact design provides for more power-dense packages.
Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Browning® 1297373 Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.28 in OD, 40-2 Chain, 19 Teeth, 1/2 in Pitch, Steel
Browning® 1297373 Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.28 in OD, 40-2 Chain, 19 Teeth, 1/2 in Pitch, Steel
Browning® 1176817 Double Single Strand Type DS-2 Roller Chain Sprocket With Hardened Teeth, 3/4 to 2-11/16 in Dia Bore, 5.95 in OD, 80 Chain, 17 Teeth, 1 in Pitch, Steel
Browning® stock double single sprockets with Split-Taper® bushings are for use with two single strand chains, normally one drive chain and one driven chain as on roll case drives or live roller conveyor drives. They are made of steel, have hardened teeth and are ready to use right off the shelf. No reworking is necessary since they use Browning® Split-Taper® bushings.
