QD Bushings
IDC Select® IDC SH-3/4 Finished Bore QD® Bushing, 3/4 in Dia Bore, 1.871 in Dia Barrel, 2-11/16 in Dia Flange, 1-5/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC SK-1-3/16 Finished Bore QD® Bushing, 1-3/16 in Dia Bore, 2.812 in Dia Barrel, 3-7/8 in Dia Flange, 1-15/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Martin SF 2 7/16 Standard QD Bushing, 2-7/16 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 2.063 in OAL, Ductile Iron
QD (quick detachable) bushings are designed for conventional mounting or reverse mounting. These bushings have a flange.
Martin SK 1 7/8 Standard QD Bushing, 1-7/8 in Dia Bore, 2.812 in Dia Barrel, 3-7/8 in Dia Flange, 1.938 in OAL, Steel
QD (quick detachable) bushings are designed for conventional mounting or reverse mounting. These bushings have a flange.
Recently Viewed
Champion CT7-1-5/8 Hole Cutter, 1-5/8 in Dia, 1 in D Cutting, Carbide Cutting Edge
Champion CT7-1-5/8 Hole Cutter, 1-5/8 in Dia, 1 in D Cutting, Carbide Cutting Edge
3/8" X 2" SAE GR-5 Hex Head Capscrew
24" HORSEHAIR PUSH BROOM (HEAD ONLY) - DQB10603 >
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Leviton® OSSMD-GDW 1-Pole Dual Relay Field Configurable Self Adjusting Occupancy Sensor, 120/230/277 V AC, Multi-Technology/PIR/Ultrasonic Sensor, 2400 sq-ft Coverage, 180 deg Viewing, Wall Mounting
The OSSMD provides automatic lighting control for two separate loads from a single unit. It is compatible with incandescent, fluorescent, low voltage lighting and fan loads. The unit features dual manual-override switches that can be used to toggle the ON/OFF status of each lighting load while an area is occupied. The OSSMD can be installed in place of two single pole wall switches and fits in a standard single gang wall box.
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
