IDC Select® IDC SD-28MM Finished Bore QD® Bushing, 28 mm Dia Bore, 2.187 in Dia Barrel, 3-1/8 in Dia Flange, 1-13/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
-
BrandIDC Select®
-
UPC887412019598
-
Manufacturer Part NumberIDC SD-28MM
-
CountryUSA
-
MaterialNodular Graphite Cast Iron
-
Flange Diameter3-1/8 in
-
Flange Thickness7/16 in
-
Torque Rating6 ft-lb
-
TypeFinished Bore
-
Screw Size1/4-20 x 1-7/8 in
-
Barrel Diameter2.187 in
-
Keyway Size8 x 7 mm
-
Bolt Circle Diameter2-11/16 in
-
Bore Diameter28 mm
-
Overall Length1-13/16 in
- Easy installation and dismount
- Setscrew over keyway
- Most sizes can be reverse mounted
- Keystock provided with shallow key sizes
- SD size QD® bushing
-
UNSPSC31171605
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified|ASTM A536/A536-84|SAE Standard
-
Catalog
-
Technical Bulletin
Recently Viewed
IDC Select® IDC SD-28MM Finished Bore QD® Bushing, 28 mm Dia Bore, 2.187 in Dia Barrel, 3-1/8 in Dia Flange, 1-13/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
6-PACK PERSONAL COOLER - JWH808687 >
Rust-Oleum Industrial Choice M1800 System Precision Line Inverted Marking Spray Paint features a fast-drying, water-based formula that creates bold, durable marks for a variety of industries including construction, excavation, surveying, landscaping, utility and more.
IDC Select® IDC F-60MM Finished Bore QD® Bushing, 60 mm Dia Bore, 4.437 in Dia Barrel, 6-5/8 in Dia Flange, 3-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
3 -FEMALE PIPE THREAD METAL STAINLESS STEEL COUPLING
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
