QD Bushings
Browning® 3208212 Type SK Q-D® Bushing, 24 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Cast Iron
Browning® 3208212 Type SK Q-D® Bushing, 24 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Cast Iron
Browning® 3208238 Type SK Q-D® Bushing, 28 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Browning® 3208238 Type SK Q-D® Bushing, 28 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Browning® 3208261 Type SK Q-D® Bushing, 35 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Cast Iron
Browning® 3208261 Type SK Q-D® Bushing, 35 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Cast Iron
Browning® 3208279 Type SK Q-D® Bushing, 38 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Browning® 3208279 Type SK Q-D® Bushing, 38 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Browning® 3208287 Type SK Q-D® Bushing, 40 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Browning® 3208287 Type SK Q-D® Bushing, 40 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Browning® Sure-Grip® F334 Standard QD Bushing, 3-3/4 in Dia Bore, 7/16 in Dia Barrel, 6-5/8 in Dia Flange, 3.63 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning® Sure-Grip® SK2116 Standard QD Bushing, 2-1/16 in Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1.88 in OAL, Ductile Iron
Q
Quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Dodge® 120427 QD Bushing, 1-3/8 in Dia Bore, 2.81 in Dia Barrel, 3-7/8 in Dia Flange, 1.88 in OAL, Ductile Iron
Dodge® 120427 QD Bushing, 1-3/8 in Dia Bore, 2.81 in Dia Barrel, 3-7/8 in Dia Flange, 1.88 in OAL, Ductile Iron
Dodge® 120479 QD Bushing, 2-7/16 in Dia Bore, 3.13 in Dia Barrel, 4-5/8 in Dia Flange, 2 in OAL, Ductile Iron
Dodge® 120479 QD Bushing, 2-7/16 in Dia Bore, 3.13 in Dia Barrel, 4-5/8 in Dia Flange, 2 in OAL, Ductile Iron
Dodge® SDSX1-15/16 Type SDS QD Bushing, 1-15/16 in Dia Bore, 2-3/16 in Dia Barrel, 3-3/16 in Dia Flange, 1-5/16 in OAL, Ductile Iron
Dodge® QD® bushings have a flanged design and feature a 4 deg taper with conventional or reverse mounting. They are stocked in popular finished bore sizes and minimum plain bore for custom reboring.
Dodge® SDSX1-3/4 Type SDS QD Bushing, 1-3/4 in Dia Bore, 2-3/16 in Dia Barrel, 3-3/16 in Dia Flange, 1-5/16 in OAL, Ductile Iron
Dodge® QD® bushings have a flanged design and feature a 4 deg taper with conventional or reverse mounting. They are stocked in popular finished bore sizes and minimum plain bore for custom reboring.
Dodge® SKX15/16 Type SK QD Bushing, 15/16 in Dia Bore, 2-13/16 in Dia Barrel, 3-5/16 in Dia Flange, 1-7/8 in OAL, Ductile Iron
Dodge® QD® bushings have a flanged design and feature a 4 deg taper with conventional or reverse mounting. They are stocked in popular finished bore sizes and minimum plain bore for custom reboring.
IDC Select® IDC E-1-1/2 Finished Bore QD® Bushing, 1-1/2 in Dia Bore, 3.834 in Dia Barrel, 6 in Dia Flange, 2-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC F-1-3/4 Finished Bore QD® Bushing, 1-3/4 in Dia Bore, 4.437 in Dia Barrel, 6-5/8 in Dia Flange, 3-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC F-60MM Finished Bore QD® Bushing, 60 mm Dia Bore, 4.437 in Dia Barrel, 6-5/8 in Dia Flange, 3-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC JA-1-1/8 Finished Bore QD® Bushing, 1-1/8 in Dia Bore, 1-3/8 in Dia Barrel, 2 in Dia Flange, 1 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC M-2-15/16 Finished Bore QD® Bushing, 2-15/16 in Dia Bore, 6-1/2 in Dia Barrel, 9 in Dia Flange, 6-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC SD-24MM Finished Bore QD® Bushing, 24 mm Dia Bore, 2.187 in Dia Barrel, 3-1/8 in Dia Flange, 1-13/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC SD-28MM Finished Bore QD® Bushing, 28 mm Dia Bore, 2.187 in Dia Barrel, 3-1/8 in Dia Flange, 1-13/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC SDS-30MM Finished Bore QD® Bushing, 30 mm Dia Bore, 2.187 in Dia Barrel, 3-1/8 in Dia Flange, 1-5/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC SF-1-11/16 Finished Bore QD® Bushing, 1-11/16 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 2-1/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC SF-15/16 Finished Bore QD® Bushing, 15/16 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 2-1/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC SH-3/4 Finished Bore QD® Bushing, 3/4 in Dia Bore, 1.871 in Dia Barrel, 2-11/16 in Dia Flange, 1-5/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® IDC SK-1-3/16 Finished Bore QD® Bushing, 1-3/16 in Dia Bore, 2.812 in Dia Barrel, 3-7/8 in Dia Flange, 1-15/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Recently Viewed
BBI 762104 Hex Nut, 5/8-18, Stainless Steel, A2 (18-8) ASTM F594 Material Grade, Right Thread
BBI 762104 Hex Nut, 5/8-18, Stainless Steel, A2 (18-8) ASTM F594 Material Grade, Right Thread
BBI 319625 Hex Nut, 3/4-16, Low Carbon Steel, Zinc CR+3, 2 Material Grade
Browning® 1128792 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Hardened Teeth and Keyway, 7/8 in Dia Bore, 3.315 in OD, #50 Chain, 15 Teeth, 5/8 in Pitch, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Browning® 1879238 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Hardened Teeth and Keyway, 3/4 in Dia Bore, 2.83 in OD, #35 Chain, 22 Teeth, 3/8 in Pitch, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Browning® 1879725 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Hardened Teeth and Keyway, 1-7/16 in Dia Bore, 3.136 in OD, #40 Chain, 18 Teeth, 1/2 in Pitch, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Browning® 1879279 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Hardened Teeth and Keyway, 3/4 in Dia Bore, 2.95 in OD, #35 Chain, 23 Teeth, 3/8 in Pitch, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
