Dodge® 120479 QD Bushing, 2-7/16 in Dia Bore, 3.13 in Dia Barrel, 4-5/8 in Dia Flange, 2 in OAL, Ductile Iron
Dodge® 120479 QD Bushing, 2-7/16 in Dia Bore, 3.13 in Dia Barrel, 4-5/8 in Dia Flange, 2 in OAL, Ductile Iron
-
BrandDodge®
-
UPC782475101429
-
Manufacturer Part Number120479
-
CountryUSA
-
MaterialDuctile Iron
-
Flange Diameter4-5/8 in
-
Flange Thickness1/2 in
-
Torque Rating11000 in-lb
-
Screw Size3/8-16 x 2 in
-
Number of Bolt Holes3
-
Hub Diameter6.38 in
-
Barrel Diameter3.13 in
-
Keyway Size5/8 x 3/16 in
-
Bolt Circle Diameter3-7/8 in
-
Bore Diameter2-7/16 in
-
Overall Length2 in
- Size SF bushing
- Flanged design
- 4 deg angled taper
- Easy On/Off operation
- Manufactured precisely to industry standards
-
Alternative Part NumberSF X 2-7/16-KW
-
UNSPSC31171605
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 120479 QD Bushing, 2-7/16 in Dia Bore, 3.13 in Dia Barrel, 4-5/8 in Dia Flange, 2 in OAL, Ductile Iron
Dodge® 120479 QD Bushing, 2-7/16 in Dia Bore, 3.13 in Dia Barrel, 4-5/8 in Dia Flange, 2 in OAL, Ductile Iron
2-1-1/16" -ID SPHERICAL INSERT BEARING-FAFG1211KRRB >
ASP-872-S Industry Standard Clamping Collar, 2-Piece Construction, 7/8 in ID x 1-5/8 in OD x 1/2 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
1/2" -FEMALE PIPE THREADX1/4" -FEMALE PIPE THREAD BLACK REDUCER-JPW1/2X1/4BR >
1-1/4" ELECTRICAL STRUT CLAMPS-JWH511587>
Browning® 1228865 Finished Bore Straight Miter Gear With Hardened Teeth, Keyway and Setscrew, 1 in Dia Bore
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
