Multiple Groove Sheaves
Gates® Power Transmission QD2A7.0/B7.4 Heavy Duty Multi-Duty Sheave, 1/2 to 2-1/2 in QD® Bore, 7-3/4 in OD, 2 Grooves, 7 in (A)/7.4 in (B) Dia Pitch, 1-3/4 in W Face
From heavy-duty sheaves built to haul your heavy loads to light-duty sheaves designed for your vehicle’s drive system, and multi-duty sheaves for every application in between, Gates designs a wide range of versatile, high performance sheaves to keep your belt drive system running smooth. Each sheave is precision manufactured to ensure the perfect fit, and can be completely customized to your belt system with Gates Made-To-Order metals.
Gates® Power Transmission Super HC® QD5/5V7.10 Heavy Duty Multiple Groove Sheave, 1/2 to 2-15/16 in QD® Bore, 7.1 in OD, 5 Grooves, 7 in Dia Pitch, 3-3/4 in W Face
Gates QD, or "Quick Disconnect", sheaves are designed for easy, convenient use with your Super HC™ and Super HC PowerBand® belts.
Gates® Power Transmission Super HC® QD5/5V8.50 Heavy Duty Multiple Groove Sheave, 7/8 to 3-1/2 in QD® Bore, 8-1/2 in OD, 5 Grooves, 8.4 in Dia Pitch, 3-3/4 in W Face
Gates QD, or "Quick Disconnect", sheaves are designed for easy, convenient use with your Super HC™ and Super HC PowerBand® belts.
Gates® Power Transmission Super HC® QD9/5V13.20 Heavy Duty Multiple Groove Sheave, 3-15/16 in QD® Bore, 13.2 in OD, 9 Grooves, 6-1/2 in W Face
Gates QD, or "Quick Disconnect", sheaves are designed for easy, convenient use with your Super HC™ and Super HC PowerBand® belts.
IDC Select® classical A/B combination, C and D sheaves, and narrow 3V, 5V, and 8V sheaves are available in QD® bushing designs. They are precision machined from 30 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30,000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm, or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V, and 8V belts.
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V and 8V belts.
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30,000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm, or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V, and 8V belts.
MasterDrive 4/5V975E Type B-2 Groove Sheave, 7/8 to 3-1/2 in Dia Bore, 9.75 in Dia Outside, 4 Grooves, 9.65 in Dia Pitch, 3.062 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 5/3V600SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6 in Dia Outside, 5 Grooves, 5.95 in Dia Pitch, 2.312 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6/5V850E Type A-1 Groove Sheave, 7/8 to 3-1/2 in Dia Bore QD Bushed Bore, 8.5 in Dia Outside, 6 Grooves, 8.4 in Dia Pitch, 4.43 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B58SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.15 in Dia Outside, 6 Grooves, 5.4 in (A)/5.8 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B64SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.75 in Dia Outside, 6 Grooves, 6 in (A)/6.4 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B66SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.95 in Dia Outside, 6 Grooves, 6.2 in (A)/6.6 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B68SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 7.15 in Dia Outside, 6 Grooves, 6.4 in (A)/6.8 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B70SF Type A-1 Groove Sheave, 1/2 to 2-15/16 in Dia Bore, 7.35 in Dia Outside, 6 Grooves, 6.6 in (A)/7 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B80SF Type A-2 Groove Sheave, 1/2 to 2-15/16 in Dia Bore, 8.35 in Dia Outside, 6 Grooves, 7.6 in (A)/8 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B94SF Type A-2 Groove Sheave, 1/2 to 2-15/16 in Dia Bore, 9.75 in Dia Outside, 6 Grooves, 9 in (A)/9.4 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
Recently Viewed
Makita® jig saw blade made with High Speed Steel (HSS) for faster cutting. High Speed Steel for longer life than High Carbon Steel blades. For use with jig saws that accept a T-shank blade.
Browning® 1009935 TC Series Type 13 Arm Multiple Sheave, 3/4 to 2-11/16 in Split Taper Bore, 11 in OD, 3 Grooves, 11 in Dia Pitch, 3-1/4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
576468 DO-IT-BEST/ERICKSON 3" X 30' 7500 LB. SAFE WORK LOAD POLYESTER TOW STRAP WITH LOOPS, YELLOW
DESIGNED TO HELP TOW A DISABLED VEHICLE. LOOP ENDS ALLOW FOR EASY ATTACHMENT TO VEHICLES. DURABLE POYESTER WEBBING WITH REINFORCED ENDS COVERED WITH HIGH-TENACITY NYLON TO PROTECT AGAINST PREMATURE WEAR
-JWH576468>
Gates® Power Transmission PowerGrip® GT®3 1104-8MGT-20 Synchronous Belt, 20 mm W, 1104 mm OAL, 8 mm Pitch, 138 Teeth, Neoprene
Engineered with the latest in advanced technology and materials science expertise, Gates PowerGrip™ GT4 delivers the highest power-carrying capacity of any belt in its class. In addition, Gates designed a belt with increased chemical resistance and larger temperature range capability. Gates PowerGrip GT4 belt delivers improved performance over a wide range of industrial applications. The 8MGT and 14MGT pitches are the optimum choice for high performance drives in the machine tool, paper and textile industries where durability and low maintenance are required. From resource processing to heavy manufacturing, automated production to custom assembly — Gates PowerGrip GT4 solutions improve uptime, efficiency, productivity, reliability and safety for industries around the world.
Gates® Power Transmission Hi-Power® II B108 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 111 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
