MasterDrive 6B66SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.95 in Dia Outside, 6 Grooves, 6.2 in (A)/6.6 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
-
BrandMasterDrive
-
UPC806372010100
-
Manufacturer Part Number6B66SK
-
CountryUSA
-
Face Width4.75 in
-
Bushing TypeSK
-
Pitch Diameter6.2 in (A)/6.6 in (B)
-
FinishGray
-
MaterialCast Iron
-
TypeType A-1
-
Number of Grooves6
-
Outside Diameter6.95 in
-
Bore Diameter1/2 to 2-5/8 in
-
Bore TypeQD Bushed
-
Suitable For Use WithA, AX, B and BX V-Belts
- Statically Balanced
- Easy installation/removal reduces downtime
- Able to be Reverse Mounted
-
Alternative Part Number2105008893
-
Package DescriptionEACH
Recently Viewed
MasterDrive 6B66SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.95 in Dia Outside, 6 Grooves, 6.2 in (A)/6.6 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
5/8" X 4" EYEBOLT >1043472-CROG2915/8X4 >
5/8" X 8" REGULAR NUT EYEBOLT 1043515-CROG2915/8X8 >
TB Wood's® Sure-Grip® 1203C Type B Webbed Classical V-Belt Sheave, 7/8 to 3-1/2 in QD® Bore, 12.4 in OD, 3 Grooves, 12.4 in Dia Pitch, 3-3/8 in W Face
TB Wood's® sheaves are constructed of fine grain, high tensile cast iron, and have been carefully engineered to assure maximum performance over a long life span. Behind each sheave is one of the most extensive engineering design and testing programs in the industry. With the advent of higher V-belt ratings, TB Wood's® engineers instituted additional careful test programs to ensure that each Wood's sheave would be capable of safely and dependably delivering the increased performance which was required by the new ratings. TB Wood's® engineers, using a special strain gage test stand, subject sheaves to tension and compression stresses far in excess of those encountered in actual operation.
3/8" X 4-1/2" HEAVY DUTY EYEBOLT 1043338-CROG2913/8X41/2 >
Gates® Power Transmission PowerGrip® GT®3 1104-8MGT-30 Synchronous Belt, 30 mm W, 1104 mm OAL, 8 mm Pitch, 138 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
