MasterDrive 6B68SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 7.15 in Dia Outside, 6 Grooves, 6.4 in (A)/6.8 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
-
BrandMasterDrive
-
UPC806372010117
-
Manufacturer Part Number6B68SK
-
CountryUSA
-
Face Width4.75 in
-
Bushing TypeSK
-
Pitch Diameter6.4 in (A)/6.8 in (B)
-
FinishGray
-
MaterialCast Iron
-
TypeType A-1
-
Number of Grooves6
-
Outside Diameter7.15 in
-
Bore Diameter1/2 to 2-5/8 in
-
Bore TypeQD Bushed
-
Suitable For Use WithA, AX, B and BX V-Belts
- Statically Balanced
- Easy installation/removal reduces downtime
- Able to be Reverse Mounted
-
Alternative Part Number2105008894
-
Package DescriptionEACH
Recently Viewed
MasterDrive 6B68SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 7.15 in Dia Outside, 6 Grooves, 6.4 in (A)/6.8 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
The M18 FUELâ„¢ blower has the power to clear from 15 ft, gets to full throttle in under 1 second, and is up to 4 lbs lighter than competitors. Designed to meet landscape maintenance professional needs, the POWERSTATEâ„¢ brushless motor and REDLITHIUMâ„¢ HIGH DEMANDâ„¢ 9.0 battery (sold separately) deliver 450 CFM and 120 mph output. The blower features a variable speed trigger and high/low speed settings for increased control. The high setting is for the most demanding applications and low is optimized for clearing debris from flower beds without moving mulch. The lock on button allows the blower to be locked on to full throttle, so the operating hand can be relaxed reducing fatigue. The M18 FUELâ„¢ blower is fully compatible with 150+ solutions on the M18â„¢ system.
Sometimes you want to extend drying times to create a hard, protective and glossy finish. That's when Klean-Stripâ„¢ xylene can be used in place of toluene to thin specified oil based paint, lacquer, varnish, epoxy, adhesives and synthetic enamels. Xylene will also remove certain adhesives and is an excellent solvent for cleaning up spills, as well as tools and equipment immediately after use.
COOLER BUBBLERS-HAL51544C>
1/2" CPVC 1/2" MPT TRANSITION UNIONS-JWH467391>
