Gates® Power Transmission Poly Chain® GT®2 8MX-29S-12 Synchronous Sprocket, 1/2 to 1-1/8 in Taper-Lock® Bore, 2.844 in OD, 29 Grooves, 2.907 in Dia Pitch, 0.88 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC072053824261
-
Manufacturer Part Number8MX-29S-12
-
CountryUSA
-
Face Width0.88 in
-
Bushing Type1108
-
Pitch8 mm
-
Pitch Diameter2.907 in
-
MaterialSteel
-
Flange Diameter3.09 in
-
Series7718
-
Number of Grooves29
-
Outside Diameter2.844 in
-
Bore Diameter1/2 to 1-1/8 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With12 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77181029
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-29S-12 Synchronous Sprocket, 1/2 to 1-1/8 in Taper-Lock® Bore, 2.844 in OD, 29 Grooves, 2.907 in Dia Pitch, 0.88 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission PowerGrip® GT®2 P30-14MGT-55 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.157 in OD, 30 Grooves, 5.263 in Dia Pitch, 2.81 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Gates® Power Transmission Poly Chain® GT®2 8MX-29S-21 Synchronous Sprocket, 1/2 to 1-1/8 in Taper-Lock® Bore, 2.844 in OD, 29 Grooves, 2.907 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission PowerGrip® GT®2 P56-8MGT-50 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.56 in OD, 56 Grooves, 5.614 in Dia Pitch, 2.36 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Gates® Power Transmission PowerGrip® GT®2 P32-8MGT-20 Synchronous Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 3.156 in OD, 32 Grooves, 3.208 in Dia Pitch, 1.11 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Gates® Power Transmission Poly Chain® GT®2 PB8MX-28S-36 Synchronous Sprocket, 1/2 to 1-3/4 in, 2.744 in OD, 28 Grooves, 2.807 in Dia Pitch, 1.86 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
