Gates® Power Transmission Poly Chain® GT®2 14MX-112S-37 Synchronous Sprocket, 1-3/16 to 3-15/16 in Taper-Lock® Bore, 19.54 in OD, 112 Grooves, 19.65 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053272314
-
Manufacturer Part Number14MX-112S-37
-
CountryUSA|Canada
-
Face Width2.06 in
-
Bushing Type3525
-
Pitch14 mm
-
Pitch Diameter19.65 in
-
MaterialCast Iron
-
Series7719
-
Hub Diameter8-3/4 in
-
Number of Grooves112
-
Outside Diameter19.54 in
-
Bore Diameter1-3/16 to 3-15/16 in
-
Bore TypeTaper-Lock®
-
Overall Length2-1/2 in
-
Suitable For Use With37 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77193112
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 14MX-112S-37 Synchronous Sprocket, 1-3/16 to 3-15/16 in Taper-Lock® Bore, 19.54 in OD, 112 Grooves, 19.65 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
MORSE® 58138 5955 Center Cutting Long Length Single End End Mill, 1/8 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 2-1/4 in OAL, Bright
2 45-D 3000# BLACK ELBOW
3/4" UNISET POWER NAILS--BOX OF 100-JWH323545 >
ALAN 14-THHN GRAY STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNGRY >
MORSE® 90842 5955T Center Cutting Long Length Single End End Mill, 1/4 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 3 in OAL, TiAlN Coated
