Crosby® 1032554 HG-228-1/2 x 6 Turnbuckle, Jaw/Jaw, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.14 in L Close, Steel
Crosby® 1032554 HG-228 Turnbuckle, Jaw/Jaw, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.14 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1032554
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter1/2 in
-
MaterialSteel
-
Closed Length14.14 in
-
SeriesHG-228
-
Working Load2200 lb
-
End/EndJaw/Jaw
-
Take Up6 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Forged jaw ends are fitted with bolts and nuts for 1/4 in through 5/8 in and pins and cotters on 3/4 in through 2-3/4 in sizes
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b, Type 1, Form 1, Class 7|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1032554 HG-228-1/2 x 6 Turnbuckle, Jaw/Jaw, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.14 in L Close, Steel
Crosby® 1032554 HG-228 Turnbuckle, Jaw/Jaw, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.14 in L Close, Steel
Milwaukee Hand Trucks 40119 Hand Truck With 10 in Pneumatic Tires, 800 lb Load, 50-1/2 in H x 19 in W x 20 in D, Steel
Milwaukee Hand Trucks 40119 Hand Truck With 10 in Pneumatic Tires, 800 lb Load, 50-1/2 in H x 19 in W x 20 in D, Steel
Diversitech 145-175220 Variable Motor Start Capacitor, 145 to 175 uF, 220/250 V AC, Round
This DiversiTech® 145-175220 Motor Start Capacitor, 145-175µF, 220/250 volts motor start, electrolytic, non-polarized capacitor is designed for normal intermittent service on single-phase A/C motor starting circuits.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
2.440"-OD RED EYE BEARING BUDDYS
1/2X1/8-SS-R 1/2" -female Pipe Threadx1/8" -female Pipe Thread Stainless Steel Reducer
1/2" -FEMALE PIPE THREADX1/8" -FEMALE PIPE THREAD STAINLESS STEEL REDUCER-FIT1/2X1/8SSR >
