Gates® Power Transmission PowerGrip® GT®3 1120-8MGT-20 Synchronous Belt, 20 mm W, 1120 mm OAL, 8 mm Pitch, 140 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
-
BrandGates® Power Transmission
-
UPC770075789802
-
Manufacturer Part Number1120-8MGT-20
-
CountryUSA
-
Pitch8 mm
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
Width20 mm
-
Series9356
-
Number of Teeth140
-
Overall Length1120 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Gates® patented tooth profile is designed for use with a specific sprocket groove profile
- The sprocket groove-belt tooth combinations increases capacity, while improving registration
- Eliminates lubrication and re-tensioning to reduce maintenance and labor as compared to roller chain drives
- A single twist cord helps prevent the belt from moving downward on vertical shaft ACHE applications
- Neoprene body provides protection against grime, grease, oil and moisture
- PowerGrip® GT®3 has more tooth ratchet resistance than HTD®
-
Alternative Part Number95790037
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsISO 9563
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® GT®3 1120-8MGT-20 Synchronous Belt, 20 mm W, 1120 mm OAL, 8 mm Pitch, 140 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 1120-8MGT-50 Synchronous Belt, 50 mm W, 1120 mm OAL, 8 mm Pitch, 140 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2800-8MGT-30 9232 Synchronous Belt, 350 Teeth, 8 mm Pitch, 2800 mm OAL, 30 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2800-8MGT-20 9232 Synchronous Belt, 350 Teeth, 8 mm Pitch, 2800 mm OAL, 20 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2310-14MGT-55 9232 Synchronous Belt, 165 Teeth, 14 mm Pitch, 2310 mm OAL, 55 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
Gates® Power Transmission PowerGrip® GT®3 1064-8MGT-50 Synchronous Belt, 50 mm W, 1064 mm OAL, 8 mm Pitch, 133 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
