McGill® 0000600000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 3/8 in ID x 0.6245 in OD, 1.01 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000004
-
Manufacturer Part Number0000600000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeStandard
-
SeriesMI Series
-
Inside Diameter3/8 in
-
Outside Diameter0.6245 in
-
Bore TypeRound/Spherical
-
Overall Width1.01 in
-
Suitable For Use WithGUIDEROL® GR 10, GR 68 SS, GR RS, GR RSS, GR S, GR SRS, CAGEROL® MR 10, MR 10 SS, MR RS, MR RSS, MR S, MR SRS Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 6
-
UNSPSC31171500
-
Catalog
-
Specification Sheet
Recently Viewed
McGill® 0000600000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 3/8 in ID x 0.6245 in OD, 1.01 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
Intertape® 99486 PT14 Specialty UV-Resistant Masking Tape, 54.8 m L x 18 mm W, 5.5 mil THK, Synthetic Rubber Adhesive, Fine Crepe Paper Backing
Intertape® 99486 PT14 Specialty UV-Resistant Masking Tape, 54.8 m L x 18 mm W, 5.5 mil THK, Synthetic Rubber Adhesive, Fine Crepe Paper Backing
SmartlockPro® N7899-HGR 1-Phase Duplex GFCI Receptacle, 125 VAC, 20 A, 2 Poles, 3 Wires, Red
SmartlockPro® N7899-HGR 1-Phase Duplex GFCI Receptacle, 125 VAC, 20 A, 2 Poles, 3 Wires, Red
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Reelcraft® 1-HR1004-A Adjustable Hose/Cord Bumper Stop, For Use With L4000, L4500, L5000 and DP Series Hose Reels, 1/4 in ID Hose, 12 AWG, 3 Conductors, Rubber, Black, Import
Proto® J5854 Socket Adapter, Full Polished, Square Drive, 3/4 in Male Drive, 1 in Female Drive, Female x Male Adapter, ASME B107.500/B107.10M, ANSI B107.10M, Federal GGG-W-641E, Alloy Steel
