McGill® 0003000000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-7/8 in ID x 2.2489 in OD, 1.76 in OAW, For Use With CAGEROL® MR RS, MR RSS, MR S, MR SRS, GR 26, MR 36 SS Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000561
-
Manufacturer Part Number0003000000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeStandard
-
SeriesMI Series
-
Inside Diameter1-7/8 in
-
Outside Diameter2.2489 in
-
Bore TypeRound/Spherical
-
Overall Width1.76 in
-
Suitable For Use WithCAGEROL® MR RS, MR RSS, MR S, MR SRS, GR 26, MR 36 SS Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 30
-
UNSPSC31171500
-
Package DescriptionEACH
-
Specification Sheet
-
Catalog
Recently Viewed
McGill® 0003000000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-7/8 in ID x 2.2489 in OD, 1.76 in OAW, For Use With CAGEROL® MR RS, MR RSS, MR S, MR SRS, GR 26, MR 36 SS Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
Proto® TorquePlus™ J1061M Box End Wrench, 14 x 15 mm Wrench, 12 Points, 7.5 deg Offset, 9 in OAL, Alloy Steel, Full Polished, ASME B107.100, AS954E S3.8.1
1-3/4"-ID SPH/OD INSERT BEARINGS-FAFG1112KRRB>
Gates® Power Transmission Hi-Power® II PowerBand® 3/C210 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 214 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Remke Tuff-Seal™ 7303-004R Non-Insulated Wide Range Strain Relief Grip With Mesh, 3/4 in Trade, 0.52 to 0.73 in Cable Openings, Aluminum
Tuff-Seal™ strain relief grips are used to connect cord or cable to electrical enclosures and equipment, power boxes, portable power tools, panel boards and machine tools. For indoor use only in dry locations, these grips help control arc-of-bend and prevent cable pull-out and damage resulting from flexing. Strain is distributed over the length of these grips instead of at a single point. These tuff seal strain relief grips are made with a single-weave, galvanized steel mesh and feature aluminum fittings and a gasket that provides an environmental seal against dust, filings and other foreign material.
1-1/4" X 1/8" X 72" ANGLE STOCK - FOR49481 >
