Bearing Inner Rings
Torrington NEEDLE BEARING INNER RACES TOR IR-88
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
Torrington NEEDLE BEARING INNER RACES TOR IR-242820
Koyo IR-242820 Inch Series Inner Ring, 1-1/2 in ID x 1-3/4 in OD, 1-1/4 in OAW, For Use With HJ-283720 Heavy Duty Needle Roller Bearing, Steel
Torrington NEEDLE BEARING INNER RACES TOR IR-2424
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
Torrington NEEDLE BEARING INNER RACES TOR IR-2020
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
Torrington NEEDLE BEARING INNER RACES TOR IR-192420
Koyo IR-192420 Inch Series Inner Ring, 1-3/16 in ID x 1-1/2 in OD, 1-1/4 in OAW, For Use With HJ-243320 Heavy Duty Needle Roller Bearing, Steel
Torrington NEEDLE BEARING INNER RACES TOR IR-101412
Koyo IR-101412 Inch Series Inner Ring, 5/8 in ID x 7/8 in OD, 3/4 in OAW, For Use With HJ-142212 Heavy Duty Needle Roller Bearing, Steel
Torrington NEEDLE BEARING INNER RACES TOR IR-081212
Koyo IR-081212 Inch Series Inner Ring, 1/2 in ID x 3/4 in OD, 3/4 in OAW, For Use With HJ-122012 Heavy Duty Needle Roller Bearing, Steel
Torrington NEDDLE BEARING INNER RACES TOR IR-1212
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
RBC Bearings NEEDLE BEARING INNER RACES RBC IR-8407
RBC® IR8407 Pitchlign® Heavy Duty Inner Ring, 1-3/4 in ID x 2-1/4 in OD, 1.76 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings NEEDLE BEARING INNER RACES RBC IR-7285
RBC® IR7285 Pitchlign® Heavy Duty Inner Ring, 1-1/4 in ID x 1-9/16 in OD, 1.26 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings NEEDLE BEARING INNER RACE RBC IR-8517-C
RBC® IR8517C Pitchlign® Heavy Duty Inner Ring, 2-1/2 in ID x 3 in OD, 1.76 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings 7/8"-ID NEEDLE BEARING INNER RACES RBC IR-7214
RBC® IR7214 Pitchlign® Heavy Duty Inner Ring, 7/8 in ID x 1-1/8 in OD, 1.01 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings 1"-ID NEEDLE BEARING INNER RACES RBC IR-7235
RBC® IR7235 Pitchlign® Heavy Duty Inner Ring, 1 in ID x 1-1/4 in OD, 1.26 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings 1"-ID NEEDLE BEARING INNER RACES RBC IR-7234
RBC® IR7234 Pitchlign® Heavy Duty Inner Ring, 1 in ID x 1-1/4 in OD, 1.01 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings 1-1/4" NEEDLE BEARING INNER RACES RBC IR-7275-C
RBC® IR7275C Pitchlign® Heavy Duty Inner Ring, 1-1/4 in ID x 1-1/2 in OD, 1.26 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
McGill® 0007230000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 4-1/2 in ID x 5.4985 in OD, 2.515 in OAW, For Use With GUIDEROL® GR 88 N, CAGEROL® MR 88 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
McGill® 0006800000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 4-1/4 in ID x 4.9985 in OD, 2.26 in OAW, For Use With GUIDEROL® GR 80, CAGEROL® MR 80 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
McGill® 0006400000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 4 in ID x 4.9985 in OD, 2.26 in OAW, For Use With GUIDEROL® GR 80, CAGEROL® MR 80 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
McGill® 0004800000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 3 in ID x 3.4987 in OD, 2.01 in OAW, For Use With GUIDEROL® GR 56, CAGEROL® MR 56 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
McGill® 0004700000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 2-15/16 in ID x 3.4987 in OD, 2.01 in OAW, For Use With GUIDEROL® GR 56, CAGEROL® MR 56 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
McGill® 0004200000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 2-5/8 in ID x 3.2487 in OD, 1.76 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
McGill® 0003230000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 2 in ID x 2.4989 in OD, 1.51 in OAW, For Use With GUIDEROL® GR 40 N, CAGEROL® MR 40 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
McGill® 0003200000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 2 in ID x 2.4989 in OD, 1.76 in OAW, For Use With CAGEROL® MR RS, MR RSS, MR S, MR SRS, MR 40 SS Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
McGill® 0003100000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-15/16 in ID x 2.4989 in OD, 1.76 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
Recently Viewed
GP® 8029 Standard Length Socket Set, Imperial, 6 Points, 3/4 in, 29 Pieces, Molded Storage Case Container
GP® 8029 Standard Length Socket Set, Imperial, 6 Points, 3/4 in, 29 Pieces, Molded Storage Case Container
4-PIECE 3/8" -DR STD DEEP SOCKET SET-RGLDSS438S >
Proto® TorquePlus™ J5210 Standard Length Socket, Imperial, 3/8 in Square Drive, 5/16 in
12-MM BOTTOM TAP-FTS237776>
BRONZE COUPLING INSERTS-BRWJS6B >
Proto® TorquePlus™ J7430M Standard Length Socket, Metric, 1/2 in Square Drive, 30 mm
