Precision Deep Groove Ball Bearings
NSK is the World Leader in Deep Groove Ball Bearings. Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
Gulf Bearing 3/8" DOUBLE-SHIELDED BALL BEARINGS GUL 1614-2-Z
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Gulf Bearing 7/16" DOUBLE-SEALED BALL BEARINGS GUL 1620-2-RS
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Gulf Bearing 7/16" DOUBLE-SHIELDED BALL BEARING GUL 1607-2-Z
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Nice® ER20 ER Series Non-Fill Slot Precision Deep Groove Ball Bearing With Extended Inner Ring, 1-1/4 in Dia Bore, 2.835 in OD, 1 Rows, 1-11/16 in W, 5755 lb Load
Recently Viewed
CURVED POINT UTILITY TWEEZERS-GNL415>
Akro-Mils® 30220BLUE Hang and Stack Bin, 7-3/8 in L x 4-1/8 in W x 3 in H, Blue
Proto® ProtoGrip™ J7218PF High Strength Magnetic Power Standard Length Socket, Imperial, 3/8 in Square Drive, 9/16 in Hex Socket
Milwaukee® 48-62-6046 Floor Scraper Chisel, SDS-Plus Shank, 4 in W Blade, 10 in OAL
The MILWAUKEE® SDS Plus SLEDGE™ Chisels are Milwaukee's Longest Lasting, Most Productive family of chisels. The SDS Plus SLEDGE™ Floor Scraper is engineered with a 5” wide blade to remove 25% more material, maximizing removal of tile, linoleum, laminate, and adhesive. The sharpened, flexible 5" blade cuts under material faster and has a beveled plate edge to prevent material binding. The floor scraper is also equipped with countersunk bolts to reduce loosening. This MILWAUKEE® SDS Plus SLEDGE™ Floor Scraper is designed for use with SDS Plus rotary hammers.
10-32" X 1-3/4" S/H CAPSCREWS-HOL73050>
USS SOCKET HEAD CAPSCREWS-HOL72142>
