Sealmaster 50-MM-ID SPH/OD INSERT BEARINGS SEA 5210
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000335
-
Manufacturer Part Number700035
-
CountryUSA
-
Load Capacity35092 N Dynamic/23202 N Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3550 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width51.59375 mm
-
Bearing MaterialSteel
-
Outside Diameter89.99982 mm
-
Bore Diameter50 mm
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number5210
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
F4B-SXR-55M Dodge® 125674 211 Series Normal Duty Non-Expansion Ball Bearing Unit, 55 mm Dia Bore, 130.2 mm L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 165.1 mm OAL/Dia
F4B-SXR-55M Dodge® 125674 211 Series Normal Duty Non-Expansion Ball Bearing Unit, 55 mm Dia Bore, 130.2 mm L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 165.1 mm OAL/Dia
FYH® NA210 50MM NA Series Cylindrical Insert Bearing, 50 mm Dia Bore, 2.46 in W, 35.1 kN Dynamic/23.3 kN Static Load
FYH® NA210 50MM NA Series Cylindrical Insert Bearing, 50 mm Dia Bore, 2.46 in W, 35.1 kN Dynamic/23.3 kN Static Load
End fittings are Quenched & Tempered or normalized, bodies heat-treated by normalizing.
Hot-dip galvanized steel.
Hooks are forged with a greater cross-sectional area that results in a stronger hook with better fatigue properties.
Dremel® 412 Sanding Disc, 220 Grit, 3.2 mm Shank
SPRAYS UPSIDE DOWN FOR EASY, COMPLETE APPLICATION. EFFECTIVELY REPELS MOSQUITOES, TICKS, GNATS, BITING FLIES, CHIGGERS, AND FLEAS FOR HOURS
-JWH713482>
