Crosby® 1090553 G-400#5 Eye Nut, 3/4 in, Forged Steel, Hot Dipped Galvanized, 5200 lb Working
Crosby® 1090553 G-400 Eye Nut, 3/4 in, Forged Steel, Hot Dipped Galvanized, 5200 lb Working
-
BrandCrosby®
-
Manufacturer Part Number1090553
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Length0.88 in
-
MaterialForged Steel
-
Material GradeASME B30.26
-
Thread TypeUNC
-
Measurement SystemImperial
-
SeriesG-400
-
Working Load5200 lb
-
Diameter - Thread Size3/4 in
-
Overall Height3.89 in
-
Eye Inside Diameter1-3/4 in
-
Eye Outside Diameter3 in
- Tapped with standard UNC class 2 threads after galvanizing
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 55KF40 |
-
UNSPSC31161711
-
Catalog
Recently Viewed
Crosby® 1090553 G-400#5 Eye Nut, 3/4 in, Forged Steel, Hot Dipped Galvanized, 5200 lb Working
Crosby® 1090553 G-400 Eye Nut, 3/4 in, Forged Steel, Hot Dipped Galvanized, 5200 lb Working
United Abrasives-SAIT 1AX Quick Ship™ 60046 Semi-Friable Coated Abrasive Belt, 1/2 in W x 12 in L, 50 Grit, Medium Grade, Aluminum Oxide Abrasive, Cotton Backing
Cylindrical Roller Bearing – ‘NJ’ CONFIGURATION Cylindrical Roller Bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in assembly/disassembly of components. The ‘NJ’ Type bearings has shoulders on both sides of the outer ring and one shoulder on the inner ring. This allows the bearing to accept light axial loads in one direction. Some sizes may be available in a high capacity design (EG) that has larger diameter rollers and a polyamine cage. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in gearboxes, rolling mills, crushers and pulverizers.
BBI 588637 Fully Threaded Machine Screw, 1/4-20, 1-1/4 in OAL, Round Head, Zinc CR+3 Plated, Phillips® Drive
BBI 588637 Fully Threaded Machine Screw, 1/4-20, 1-1/4 in OAL, Round Head, Zinc CR+3 Plated, Phillips® Drive
