LEVITON 3-GANG S/STEEL ELEC/SWITCH COVERS LEV 84011
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
-
BrandLeviton®
-
UPC078477429600
-
Manufacturer Part Number84011
-
CountryUSA
-
FinishBrushed Smooth
-
Thickness0.19 in
-
Material430 Stainless Steel
-
TypeStandard Size Traditional
-
MountingSurface
-
Cutout0.942 in H x 0.406 in W Toggle Switch
-
Number of Gangs3
-
Size6.37 in W x 4.5 in H
- Easy to clean, smooth finish, non-combustible
- Accent any wall covering with a wide selection of colors and finishes
- Round on edges to prevent injury and wall damage
-
Alternative Part Number7317264
-
UNSPSC39121704
-
IDEA Index ID7317264
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified/UL Listed;NEMA;ANSI
-
Warranty10 Years Limited
-
Catalog
-
Specification Sheet
Recently Viewed
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
14 AWG min. Conductor Size; 1/0 AWG Max. Conductor Size; Copper/Aluminum Conductor Material; UL 486A/B, UL 453G, CSA Approval; 600 Volt Voltage Rating; High Dielectric Strength Plastisol Insulated Body Material; 2 Port(S); 1-Side Entry Cable Entry
Cylindrical Roller Bearing – ‘NJ’ CONFIGURATION Cylindrical Roller Bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in assembly/disassembly of components. The ‘NJ’ Type bearings has shoulders on both sides of the outer ring and one shoulder on the inner ring. This allows the bearing to accept light axial loads in one direction. Some sizes may be available in a high capacity design (EG) that has larger diameter rollers and a polyamine cage. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in gearboxes, rolling mills, crushers and pulverizers.
Appleton® UNILETS™ LR75A Type LR Conduit Outlet Body, 3/4 in Hub, Form 85 Form, 70 cu-in Capacity, Pressure Cast Aluminum, Epoxy Powder Coated
Appleton® Form 85™ UNILETS™ Conduit Outlet Bodies, Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system, they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintece.
Dodge® 023386 203 Double Interlock Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 8.06 to 9.25 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 6.52 in OAH
Dodge® 023386 203 Double Interlock Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 8.06 to 9.25 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 6.52 in OAH
Oatey® No-Calk® 11890 Roof Flashing, Thermoplastic, 3 in Pipe, 11-1/4 in W x 15 in L Base, Domestic
Oatey's durable Thermoplastic No-Calk® Roof Flashings with standard bases are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years.
