Martin CHB2203N S/CHB Type 220 Plain Sleeve Hanger Bearing, 1-1/2 in Dia Bore, Nylatron Bearing
Nylatron bearings are used as support bearings for drive and screw conveyor shafts. This self-lubricating hanger bearing can withstand temperatures up to 250 deg F and is compatible with 220 and 19B style hangers. It is recommended for grain, feed and chemical handling applications due the very low load capacity attribute.
-
BrandMartin
-
UPC697950079523
-
Manufacturer Part NumberCHB2203N
-
CountryUSA|Canada
-
Temperature Rating250 deg F
-
FinishUncoated
-
TypeType 220
-
SeriesS/CHB
-
Bearing MaterialNylatron
-
Bore Diameter1-1/2 in
- Self Lubricating
-
UNSPSC31171513
-
Catalog
Recently Viewed
Martin CHB2203N S/CHB Type 220 Plain Sleeve Hanger Bearing, 1-1/2 in Dia Bore, Nylatron Bearing
Nylatron bearings are used as support bearings for drive and screw conveyor shafts. This self-lubricating hanger bearing can withstand temperatures up to 250 deg F and is compatible with 220 and 19B style hangers. It is recommended for grain, feed and chemical handling applications due the very low load capacity attribute.
Chicago Pneumatic T023999 Reversible Angle Pneumatic Drill, 3/8 in Chuck, 0.27 hp, 20.614 to 21 cfm Air Flow, 8.3 in OAL
Chicago Pneumatic T023999 Reversible Angle Pneumatic Drill, 3/8 in Chuck, 0.27 hp, 20.614 to 21 cfm Air Flow, 8.3 in OAL
Martin 2012 1 7/8 Standard Taper Lock Bushing, 1-7/8 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Martin 2012 1 7/8 Standard Taper Lock Bushing, 1-7/8 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Conveyor coupling shafts are used to join individual lengths of conveyor screws and allow for rotation within the hanger bearing. Steel couplings are normally furnished, however couplings with hardened bearing surfaces may be furnished where highly abrasive materials are being conveyed. Jig drilling allows for ease of installation.
Martin CHB2204W S/CHB Type 220 Plain Sleeve Hanger Bearing, 2 in Dia Bore, Wood Bearing
Wood bearings are used as support bearings for drive and screw conveyor shafts. It is self-lubricating and able to withstand temperatures up to 160 deg F. This style bearing is ideal for intermediate hangers that convey moderately abrasive materials as well as grain, feed and fertilizer applications.
Browning® 1055037 Type 2A Synchronous Timing Pulley, 3/8 to 1 in, 4.564 in OD, 72 Grooves, 4.584 in Dia Pitch, 0.563 in W Face
Martin timing pulleys are manufactured to extremely close specifications and are stocked in minimum plain bore, taper bushed, QD bushed styles depending on size and pitch. Synchronous sprockets are non-slip toothed drives that require no lubrication. These sprockets have a wide speed range, are very efficient and make less noise than chain drives. Teeth on the belts are molded to conform with and engage the teeth on a mating sprocket.
