CONSOLIDATED BRG 305703-ZZ Cylindrical OD Yoke Roller, 17 mm Dia Bore, 47 mm Dia Roller x 17.5 mm W Roller
CONS 305703-ZZ Cylindrical OD Yoke Roller, 17 mm Dia Bore, 47 mm Dia Roller x 17.5 mm W Roller
-
BrandCONS
-
UPC644075207966
-
Manufacturer Part Number305703-ZZ
-
CountryUSA
-
Temperature Rating-30 to 110 deg C
-
Closure TypeShielded
-
TypeCylindrical OD
-
Roller Diameter47 mm
-
Roller Width17.5 mm
-
Bore Diameter17 mm
- Used in applications with heavier overall loads
- Double row shielded yoke type track rollers - angular contact design - contact angle of 25 deg They are equipped with two cages made from polyamide 66 material
- Double row yoke type track rollers are lubricated with a lithium base grease - operating temperature -30 deg to 110 degC
- These bearings can be relubricated, if necessary, through a lubrication hole in the inner race
-
Package DescriptionEACH
Recently Viewed
CONSOLIDATED BRG 305703-ZZ Cylindrical OD Yoke Roller, 17 mm Dia Bore, 47 mm Dia Roller x 17.5 mm W Roller
CONS 305703-ZZ Cylindrical OD Yoke Roller, 17 mm Dia Bore, 47 mm Dia Roller x 17.5 mm W Roller
The Mag-Torch® MT 579 is a high performance silver swirl MAP-Pro™ torch that delivers an extreme swirl flame, it has an on demand trigger giving you instant ignition and flame shut off. This torch has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting. This torch can solder upto 2 in of copper.
16-FJIC X 4-MJIC HYD/ADAPTERS-DAY2406164>
Lift-All® Tuflex™ EN30X20 Endless Round Sling, 20 ft L, 2600 lb, Polyester, Purple
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
Klein® 3262 Barrel Drift Pin, 1/2 in, 8 in OAL, Alloy Steel Tip
Klein Tools Barrel-Type Drift Pins are manufactured for durability. They are machined from quality alloy steel, which is forged and heat-treated for strength. The tough, drop-forged steel will properly end-pein in use.
GEARWRENCH® GearBox™ 85998 XL Series Extra Long Length Slim Double Box End Ratcheting Wrench Set, 9 Pieces, 5/16 to 3/4 in, Polished Chrome
GEARWRENCH 85998 9-piece XL Gear Box Double Box End SAE ratcheting wrench set consists of 1 of each 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" XL gear box ratcheting wrenches. Ratcheting box end need as little as 5-Degrees to move the fastener as opposed to 30 degrees for standard box end wrenches. The standard box end combined with the long pattern length gives this wrench excellent torque capabilities to break a stubborn, rusted fastener. The ratcheting box end then makes the loosening or tightening of the fastener fast and safe. The box end features improved box end strength from GEARWRENCH's Off-Corner Loading and at the same time, reduces fastener rounding. The double box end ratcheting wrenches are made from the finest chrome vanadium steel for precision long lasting tool life.
