Thread Sealants
RectorSeal® 25552 Multi-Purpose Pipe Thread Sealant, 1/2 pt Can, Yellow
RectorSeal® pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi(for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Not recommended for use with ABS, CPVC pipe or oxygen, chlorine and other oxidizers.
RectorSeal 1/2-PT TRU-BLUE THREAD SEALANT REC 31551
RectorSeal® 31551 Tru-Blu™ Vibration Resistant Pipe Thread Sealant, 8 oz Can, Blue
RectorSeal 1/2-PT T-PLUS-2 THREAD SEALANT REC 23551
RectorSeal® T Plus 2® is a non-hardening thread sealant containing PTFE plus synthetic fibers dispersed in an resinous base combined with inert mineral fillers provide maximum sealing performance.
RectorSeal 1-PT TRU-BLUE THREAD SEALANT REC 31431
RectorSeal® Tru-Blu™ is a fast drying, adhesive thread sealant. It is especially suited for high vibration environments such as refrigeration or compressor applications. It contains PTFE for better thread sealing and for lubrication to facilitate easy break-out. It is also great for use as a positive lock and seal on threaded fasteners.
Permatex® 80633 Thread Sealant, 16 oz Brush-In Cap Bottle, White
Economical general-purpose fitting sealant. Outperforms tapes and pipe dopes. Seals and resists pressure in air, oil, diesel fuel and hydraulic systems. Remains pliable at higher and lower temperatures. Temperature range -65°F to 300°F (-54°C to 149°C); resists common shop fluids.
Permatex® 80632 General Purpose Pipe Thread Sealant, 4 oz Brush-In Cap Bottle, White
Permatex® 80632 General Purpose Pipe Thread Sealant, 4 oz Brush-In Cap Bottle, White
Permatex® 80045 Pipe Joint Compound, 16 oz Bottle, Black
Universal sealant. Lubricates and seals threaded joints on water, oil and fuel lines. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids.
Permatex® 80038 Thread Sealant, 0.75 fl-oz Tube, Blue
Permatex® Prussian blue is a non-drying blue, oily paste type pigment designed to identify points of interference and high spots on precision parts to be fitted. It speeds tracing and precision fittings of close tolerance assemblies. Makes improper fitting high spots immediately visible as bright blue streaks.
Oatey® Great White® 31232 Pipe Joint Compound, 16 oz, White
Oatey® Great White® Pipe Joint Compound with PTFE lubricates and seals all threaded joints. Both non-hardening and non-toxic, Great White can be used on plastic or metal threads in systems carrying water, steam, caustics or dilute acids. It includes a convenient in-lid brush for easy application. Oatey products have earned the trust of plumbing professionals for over 100 years.
Oatey® Great White® 31230 Pipe Joint Compound, 4 fl-oz Can, White
Oatey® Great White® Pipe Joint Compound with PTFE lubricates and seals all threaded joints. Both non-hardening and non-toxic, Great White can be used on plastic or metal threads in systems carrying water, steam, caustics or dilute acids. It includes a convenient in-lid brush for easy application. Oatey products have earned the trust of plumbing professionals for over 100 years.
Oatey® Great Blue® 31265 Pipe Joint Compound, 1 oz, Blue
Oatey® Great Blue Pipe Joint Compound is a non-separating thread sealant formulated to seal threaded connections on metal and plastic pipe up to and including 2 in. in diameter. Its uniform, smooth consistency allows for easy application on lines carrying water, natural gas (except oxygen), steam, air lines, caustics and dilute acids. Oatey products have earned the trust of plumbing professionals for over 100 years.
Oatey® Great Blue® 31261 Immediate Soft Set Pipe Joint Compound, 4 oz Can, Blue
Oatey® Great Blue Pipe Joint Compound is a non-separating thread sealant formulated to seal threaded connections on metal and plastic pipe up to and including 2 in. in diameter. Its uniform, smooth consistency allows for easy application on lines carrying water, natural gas (except oxygen), steam, air lines, caustics and dilute acids. Oatey products have earned the trust of plumbing professionals for over 100 years.
Markal 1/2-PINT SLIC-TITE THREAD SEALANT MRK 42019
Specially formulated with PTFE for added sealing power, Slic-Tite® is the premium thread sealant paste. It has been successfully used for decades to seal water, air, steam, natural gas and more. It removes easily from skin and clothing, reducing post-job cleanup time. Slic-Tite® thread sealant works in extremely high pressure systems and it comes with several approvals to ensure industry standards are met.
Loctite HI STRENGTH PIPE THREAD SEALANT LOC 5770
Sealant paste designed for metal threaded pipes and fittings in industrial applications which is particularly suitable for sealing steel metal joints. Loctite® 5770 is an Off-White to purplish gray dimethacrylate ester acrylic sealant paste designed for locking and sealing metal threaded pipes and fittings in industrial applications. It prevents loosening and leakage from shock and vibration and is particularly suitable for sealing steel metal joints where high temperature and high pressure resistance is required.
Loctite 50-ML THREAD SEALANT LOC 5452
Thixotropic, methacrylate ester acrylic thread sealant liquid designed for threaded fittings commonly found in hydraulic and pneumatic systems. Loctite® 5452 is a purple, thixotropic, methacrylate ester acrylic thread sealant liquid designed for threaded fittings commonly found in hydraulic and pneumatic systems. It is useful with dry seal fittings such as O-Ring boss style connectors. It can be used as a sealant on mating surfaces of flare style fittings. It contains no fillers or particles that can interfere with a hydraulic system.
Loctite 50-ML PST TEFLON THREAD SEALANT LOC 56747
Loctite® 56747 567™ High Viscosity Low Strength Thread Sealant, 50 mL Tube, White
Loctite 50-ML #577 YELLOW THREAD SEALANT LOC 2068749
Loctite® 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application.
Loctite 50-ML #565 PST THREAD SEALANT LOC 56531
Loctite® 88551 565™ High Viscosity Low Strength Thread Sealant, 50 mL Tube, White
Loctite 50-ML #545 HYDRAUL THREAD SEALANT LOC 54531
Loctite® 545™ hydraulic, pneumatic sealant thread sealant is a pipe sealant designed for the locking and sealing of metal pipes and fittings. This product is specially formulated to offer high lubricity for easy assembly and removal
Loctite 250-ML HIGH TEMP THREAD SEALANT LOC 56765
Loctite® 88552 565™ High Viscosity Low Strength Thread Sealant, 250 mL Tube, White
Loctite 250-ML #577 THREAD SEALANT LOC 21457
Loctite® 21457 577™ Medium Strength Pipe Thread Sealant, 250 mL Tube, Dark Yellow
Loctite 19-GRAM #561 STICK THREADLOCKER LOC 37127
Loctite® 463973 PST® 561™ General Purpose Pipe Thread Sealant, 19 g Stick, White
Loctite 16-OZ PTFE TEFLON THREAD SEALANT LOC 30561
Loctite® 1527514 5113™ 1-Part Thread Sealant, 1 pt Brush-In Cap Bottle, White
Loctite 1-PT #5117 PIPE JOINT COMPOUND LOC 30557
Loctite® 1534294 5117™ High Temperature Thread Sealant, 1 pt Brush-In Cap Bottle, Dark Brown
Recently Viewed
Milwaukee® MX4™ 48-20-3956 4-Cutter Rotary Hammer Drill Bit, 1 in Drill Bit, 45/64 in, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
The MILWAUKEE® MX4™ 4-Cutter SDS Max Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. Milwaukee designed their MX4™ 4-Cutter bits with sharp centering tips for exact spot drilling in concrete. The integrated 4-cutter design prevents lock-up in rebar, reducing downtime. Optimized flutes remove dust faster, reducing heat and delivering up to 15% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
Milwaukee® MX4™ 48-20-7230 4-Cutter Rotary Hammer Drill Bit, 7/8 in Drill Bit, 25/64 in, 10 in D Cutting, Carbide Cutting Edge, 12 in OAL
The MILWAUKEE® SDS Plus 4-Cutter MX4™ 7/8" X 10" X 12" Drill Bits with solid head carbide deliver up to 5X longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar with a 4-cutter design that prevents lock-up, reducing downtime. The sharp centering tip offers exact spot drilling in concrete and metal decking. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. A wear mark indicator shows end of life and when bit no longer meets the ANSI requirement. The Milwaukee MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
Dixon® 102-0602C Standard Hose-to-Pipe Fitting, 3/8 in x 1/8-27 Nominal, Barb x Male NPTF End Style, 360 CDA Brass, Domestic
Dixon® 102-0602C Standard Hose-to-Pipe Fitting, 3/8 in x 1/8-27 Nominal, Barb x Male NPTF End Style, 360 CDA Brass, Domestic
EATON 10250T51 Heavy Duty Standard Contact Block, 30.5 mm, 1NC Contact, 10 A at 600 V AC, 5 A at 250 V DC Contact, Silver Contact, Momentary Action, Gray
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
COLD CHISEL-MAY66122>
45-MM-ID X 53-MM-OD BUNA-N O-RINGS
