Permatex® 80633 Thread Sealant, 16 oz Brush-In Cap Bottle, White
Economical general-purpose fitting sealant. Outperforms tapes and pipe dopes. Seals and resists pressure in air, oil, diesel fuel and hydraulic systems. Remains pliable at higher and lower temperatures. Temperature range -65°F to 300°F (-54°C to 149°C); resists common shop fluids.
-
BrandPermatex®
-
UPC686226806338
-
Manufacturer Part Number80633
-
CountryCanada
-
Temperature Rating-65 to 300 deg F
-
Flash Point77 deg F
-
ColorWhite
-
CompositionEthanol, 2-Propanol, Methanol, Methyl Isobutyl Ketone
-
VOC Content0.295
-
Viscosity Rating55000 cPs
-
Container Size16 oz
-
Container TypeBrush-In Cap Bottle
-
Curing Time24 hr
-
Specific Gravity1.12
-
Odor/ScentAlcoholic
- Economical general purpose fitting sealant
- Outperforms tapes and pipe dopes
- Seals and resists pressure in air, oil, diesel fuel and hydraulic systems
- Remains reliable at high and low temperatures
- Non-drip formula and effective up to 5000 psi
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 2GXY8 |
-
UNSPSC31201612
-
Package DescriptionEACH
-
Standards/ApprovalsOSHA 29 CFR 1910.1200|PROP65: Cancer or Reproductive Harm - www.P65Warnings.ca.gov
-
SDS
Recently Viewed
Economical general-purpose fitting sealant. Outperforms tapes and pipe dopes. Seals and resists pressure in air, oil, diesel fuel and hydraulic systems. Remains pliable at higher and lower temperatures. Temperature range -65°F to 300°F (-54°C to 149°C); resists common shop fluids.
HYDRAULIC FILTERS
ALAN 14-THHN GRAY STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNGRY >
HCI Preferred Supplier 940130 Gate Valve, 1/4 in Nominal, 18 TPI FNPT End Style, C37700 Forged Brass Body
HCI Preferred Supplier 940130 Gate Valve, 1/4 in Nominal, 18 TPI FNPT End Style, C37700 Forged Brass Body
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered. Torque capacity is up to 50720 in-lb.
Precision Brand® music wire is spring tempered and made from high carbon steel alloy. High tensile strength and high fatigue resistance. Applications include springs, wire forms, control linkages, armature binding, ceramic cutting and a variety of industrial uses.
